Hi,
I am not sure, but I think that this is a problem with the UBlox modems
I was facing before with a TOBY 210.
The problem is that the modem does an automatic registration on the LTE
network using its default APN (that it gets from the network, when I
understand right). That is what you see
(m2m.com.attz.mnc170.mcc310.gprs) as context 4: (which is the default
LTE bearer on TOBY). Unfortunately, that does not match the one your
have given manually, so ModemManager tries to build up a connection
using the secondary context with the APN settings you have given --
which fails, because the service provider does not allow a secondary
connection while the first one is active.
What I am not completely clear about is, under which circumstances you
get such a long default APN name (not matching the 'official' ones) from
the network.
@Aleksander: See
https://lists.freedesktop.org/archives/modemmanager-devel/2018-August/006633.html
I heavily change the ublox plugin to work around that -- unfortunately I
never found the time to bring it to a deliverable state, and at the
moment, I can't even remember what exactly I did. But I can provide the
sources if needed....
Best regards,
Uli
Am 05.12.2019 um 19:24 schrieb Cale Collins:
Aleksander,
Thank you for looking into this.
root@bionic-armhf:~# mmcli --modem 0 --simple-connect="apn=m2m.com.attz"
ModemManager[680]: <info> [1575569894.762006] Simple connect started...
ModemManager[680]: <debug> [1575569894.762291] PIN: unspecified
ModemManager[680]: <debug> [1575569894.762401] Operator ID: unspecified
ModemManager[680]: <debug> [1575569894.762499] Allowed roaming: yes
ModemManager[680]: <debug> [1575569894.762594] APN: m2m.com.attz
ModemManager[680]: <debug> [1575569894.762686] IP family: unspecified
ModemManager[680]: <debug> [1575569894.762778] Allowed
authentication: unspecified
ModemManager[680]: <debug> [1575569894.762870] User: unspecified
ModemManager[680]: <debug> [1575569894.762961] Password: unspecified
ModemManager[680]: <info> [1575569894.763051] Simple connect state
(4/8): Wait to get fully enabled
ModemManager[680]: <info> [1575569894.763537] Simple connect state
(5/8): Register
ModemManager[680]: <debug> [1575569894.763752] Already registered in
network '310410', automatic registration not launched...
ModemManager[680]: <info> [1575569894.763951] Simple connect state
(6/8): Bearer
ModemManager[680]: <debug> [1575569894.764072] Creating new bearer...
ModemManager[680]: <debug> [1575569894.764238] u-blox: checking
current USB profile...
ModemManager[680]: <debug> [1575569894.764388] (ttyACM0) device open
count is 2 (open)
ModemManager[680]: <debug> [1575569894.764643] (ttyACM0): -->
'AT+UUSBCONF?<CR>'
ModemManager[680]: <debug> [1575569894.767565] (ttyACM0): <--
'<CR><LF>+UUSBCONF: 3,"RNDIS",,"0x1146"<CR><LF>'
ModemManager[680]: <debug> [1575569894.767977] (ttyACM0): <--
'<CR><LF>OK<CR><LF>'
ModemManager[680]: <debug> [1575569894.768349] u-blox: usb profile
loaded: rndis
ModemManager[680]: <debug> [1575569894.768462] u-blox: checking
current networking mode...
ModemManager[680]: <debug> [1575569894.768599] (ttyACM0) device open
count is 3 (open)
ModemManager[680]: <debug> [1575569894.768765] (ttyACM0) device open
count is 2 (close)
ModemManager[680]: <debug> [1575569894.768963] (ttyACM0): -->
'AT+UBMCONF?<CR>'
ModemManager[680]: <debug> [1575569894.778431] (ttyACM0): <--
'<CR><LF>+UBMCONF: 1<CR><LF>'
ModemManager[680]: <debug> [1575569894.778802] (ttyACM0): <--
'<CR><LF>OK<CR><LF>'
ModemManager[680]: <debug> [1575569894.779135] u-blox: networking mode
loaded: router
ModemManager[680]: <debug> [1575569894.779251] u-blox: creating u-blox
broadband bearer (rndis profile, router mode)...
ModemManager[680]: <debug> [1575569894.780871] (ttyACM0) device open
count is 3 (open)
ModemManager[680]: <debug> [1575569894.781081] (ttyACM0) device open
count is 2 (close)
ModemManager[680]: <debug> [1575569894.781452] u-blox: new u-blox
broadband bearer created at DBus path
'/org/freedesktop/ModemManager1/Bearer/0'
ModemManager[680]: <info> [1575569894.782125] Simple connect state
(7/8): Connect
ModemManager[680]: <debug> [1575569894.782293] Connecting bearer
'/org/freedesktop/ModemManager1/Bearer/0'
ModemManager[680]: <info> [1575569894.782484] Modem
/org/freedesktop/ModemManager1/Modem/0: state changed (registered ->
connecting)
ModemManager[680]: <debug> [1575569894.784225] Launching 3GPP
connection attempt with APN 'm2m.com.attz'
ModemManager[680]: <debug> [1575569894.784392] No specific IP family
requested, defaulting to ipv4
ModemManager[680]: <debug> [1575569894.784530] No specific IP family
requested, defaulting to ipv4
ModemManager[680]: <debug> [1575569894.784657] Looking for best CID...
ModemManager[680]: <debug> [1575569894.784804] (ttyACM0) device open
count is 3 (open)
ModemManager[680]: <debug> [1575569894.785036] (ttyACM0) device open
count is 2 (close)
ModemManager[680]: <debug> [1575569894.785237] (ttyACM0): -->
'AT+CGDCONT?<CR>'
ModemManager[680]: <debug> [1575569894.793937] (ttyACM0): <--
'<CR><LF>+CGDCONT: 1,"IP","m2m.com.attz","",0,0,0,0,0,0<CR><LF>'
ModemManager[680]: <debug> [1575569894.794405] (ttyACM0): <--
'+CGDCONT:
4,"IP","m2m.com.attz.mnc170.mcc310.gprs","10.246.2.90",0,0,0,0,0,0<CR><LF><CR><LF>OK<CR><LF>'
ModemManager[680]: <debug> [1575569894.794845] Found '2' PDP contexts
ModemManager[680]: <debug> [1575569894.794967] PDP context [cid=1]
[type='ipv4'] [apn='m2m.com.attz']
ModemManager[680]: <debug> [1575569894.795067] PDP context [cid=4]
[type='ipv4'] [apn='m2m.com.attz.mnc170.mcc310.gprs']
ModemManager[680]: <debug> [1575569894.795171] Found PDP context with
CID 1 and PDP type ipv4 for APN 'm2m.com.attz'
ModemManager[680]: <debug> [1575569894.795349] checking supported
authentication methods...
ModemManager[680]: <debug> [1575569895.126663] (ttyACM0) device open
count is 3 (open)
ModemManager[680]: <debug> [1575569895.127067] (ttyACM0) device open
count is 2 (close)
ModemManager[680]: <debug> [1575569895.127478] (ttyACM0): -->
'AT+UAUTHREQ=?<CR>'
ModemManager[680]: <debug> [1575569895.135088] (ttyACM0): <--
'<CR><LF>+UAUTHREQ: (1-8),(0-2),,<CR><LF><CR><LF>OK<CR><LF>'
ModemManager[680]: <debug> [1575569895.135773] Not using authentication
ModemManager[680]: <debug> [1575569895.136019] setting up
authentication preferences in PDP context #1...
ModemManager[680]: <debug> [1575569895.136291] (ttyACM0) device open
count is 3 (open)
ModemManager[680]: <debug> [1575569895.136604] (ttyACM0) device open
count is 2 (close)
ModemManager[680]: <debug> [1575569895.136992] (ttyACM0): -->
'AT+UAUTHREQ=1,0,"",""<CR>'
ModemManager[680]: <debug> [1575569895.146146] (ttyACM0): <--
'<CR><LF>OK<CR><LF>'
ModemManager[680]: <debug> [1575569895.146689] activating PDP context
#1...
ModemManager[680]: <debug> [1575569895.146969] (ttyACM0) device open
count is 3 (open)
ModemManager[680]: <debug> [1575569895.147284] (ttyACM0) device open
count is 2 (close)
ModemManager[680]: <debug> [1575569895.147665] (ttyACM0): -->
'AT+CGACT=1,1<CR>'
ModemManager[680]: <debug> [1575569895.456167] (ttyACM0): <--
'<CR><LF>+CME ERROR: 100<CR><LF>'
ModemManager[680]: <debug> [1575569895.456747] Got failure code 100:
Unknown error
ModemManager[680]: <debug> [1575569895.457081] Couldn't connect bearer
'/org/freedesktop/ModemManager1/Bearer/0': 'Unknown error'
ModemManager[680]: <info> [1575569895.457445] Modem
/org/freedesktop/ModemManager1/Modem/0: state changed (connecting ->
registered)
ModemManager[680]: <debug> [1575569895.460077] Couldn't connect
bearer: 'Unknown error'
ModemManager[680]: <debug> [1575569895.462356] (ttyACM0) device open
count is 1 (close)
error: couldn't connect the modem:
'GDBus.Error:org.freedesktop.ModemManager1.Error.MobileEquipment.Unknown:
Unknown error'
Best regards,
*/Cale Collins/
Field Applications Engineer
Gateworks Corporation*
(805)781-2000 x37*
*
3026 S. Higuera, San Luis Obispo, CA 93401
www.gateworks.com <http://www.gateworks.com/>
On Thu, Dec 5, 2019 at 12:35 AM Aleksander Morgado
<aleksan...@aleksander.es <mailto:aleksan...@aleksander.es>> wrote:
Hey!
> root@bionic-armhf:~# mmcli -m 0 --enable
> successfully enabled the modem
> root@bionic-armhf:~# mmcli -m 0 --simple-connect="apn=m2m.com
<http://m2m.com>.attz"
> error: couldn't connect the modem:
>
'GDBus.Error:org.freedesktop.ModemManager1.Error.MobileEquipment.Unknown:
> Unknown error'
You need to setup ModemManager running with --debug so that we can
look at the debug logs produced, we need to know which specific AT
command was the one failing and triggering the simple connect error.
--
Aleksander
https://aleksander.es
_______________________________________________
ModemManager-devel mailing list
ModemManager-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
--
Best regards / Mit freundlichen Grüßen / Salutations distinguées
Ulrich Mohr
SEMEX-EngCon GmbH
Carl-Merz-Strass 26
76275 Ettlingen
Phone: +49 (0) 7243 5143596
email: u.m...@semex-engcon.com
___________________________________________
Executive board: A. Stiegler, H.-J. Nitzpon
Commercial register: Mannheim, HRB 718881
Company domicile: Ettlingen
_______________________________________________
ModemManager-devel mailing list
ModemManager-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
