Hey On Sat, Jun 20, 2020 at 3:39 PM Ramu <ramum...@gmail.com> wrote: > > I applied patches you mentioned for UDEV tags ... Seems to be working now.. > > mmcli -m 0 --location-status > ------------------------ > Location | capabilities: 3gpp-lac-ci, gps-raw, gps-nmea, gps-unmanaged > | enabled: 3gpp-lac-ci > | signals: no > ------------------------ > GPS | refresh rate: 30 seconds >
Good! > ### Enabling GPS working fine ### > > root@tcs-imx6:~# mmcli -m 0 --location-enable-gps-nmea > successfully setup location gathering > root@tcs-imx6:~# mmcli -m 0 --location-enable-gps-raw > successfully setup location gathering > root@tcs-imx6:~# > Ok. > ### Do we need get any location Data here ??? #### > root@tcs-imx6:~# mmcli -m 0 --location-get-gps-raw > error: no actions specified > root@tcs-imx6:~# mmcli -m 0 --location-get-gps-nmea > error: no actions specified > The command you're looking for is --location-get. > But the GPS data is comign on the ttyUSB1 port .. I have not connected any > passive or active antenna for GPS as of now.. But seeing below data ... > > cat /dev/ttyUSB1 If you are using --location-enable-gps-nmea or --location-enable-gps-raw you CANNOT touch the ttyUSB1 manually. You cannot "cat" it or any other thing, because you would be hijacking the data from ModemManager. If you need to cat or touch the ttyUSB1 manually, you instead need to --location-enable-gps-unmanaged, so that MM takes care of starting the GPS engine, but then ignores the tty with the GPS data. > $GPVTG,,T,,M,,N,,K,N*2C > $GPGSA,A,1,,,,,,,,,,,,,,,,*32 > $GPGGA,,,,,,0,,,,,,,,*66 > $GPRMC,,V,,,,,,,,,,N,V*29 > $GPGLL,,,,,,V,N*64 > $GPVTG,,T,,M,,N,,K,N*2C > $GPGSA,A,1,,,,,,,,,,,,,,,,*32 > $GPGGA,,,,,,0,,,,,,,,*66 > $GPRMC,,V,,,,,,,,,,N,V*29 > $GPGLL,,,,,,V,N*64 > $GPVTG,,T,,M,,N,,K,N*2C > $GPGSA,A,1,,,,,,,,,,,,,,,,*32 > $GPGGA,,,,,,0,,,,,,,,*66 > $GPRMC,,V,,,,,,,,,,N,V*29 > $GPGLL,,,,,,V,N*64 > Given that your GPGGA trace doesn't give any location yet, the output of --location-get will not give you lat/long info, but it will still give you the list of NMEA traces received and read by ModemManager (as long as you don't hijack the tty as said above). Cheers! -- Aleksander https://aleksander.es _______________________________________________ ModemManager-devel mailing list ModemManager-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
