Hey, > > 1) Without giving manually a mmcli commands then how we can give ? and when > NetworkManager take automatically ip from ModemManager (mmcli -b 0) and > assign to LTE interface ?
Not sure I understood the question :) The idea when using the MM+NM combo is that ideally you can completely ignore using mmcli commands. It is NM the one that detects that a modem is exposed by MM, and it is NM the one that triggers the connection of the modem; and once it is connected, it is NM the one that takes the IP settings from the exposed bearer object and applies those settings to the network interface. Only creating a "gsm" setting in NM and attempting to connect it should be enough to get the whole setup up and running. > > 2) nmcli d output :- > DEVICE TYPE STATE > CONNECTION > wwp0s21f0u5i4 wwan disconnected ---- > > here TYPE is wwan coming not gsm , when we are running nmcli c add > type gsm con-name quectel apn internet command > here we are giving TYPE as gsm . is it will make issue ? > Are you building NetworkManager with the --with-modem-manager-1 explicit configure option? Can you confirm whether that's the case? Actually, could you post the output of the configure report when NM is built? -- Aleksander https://aleksander.es _______________________________________________ ModemManager-devel mailing list ModemManager-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
