Hey > > 1) These is a small part of networkmanager_1.0.10.bb file containg > modemmanager , need to change here for linking modemmanager with > networkmanager? > > PACKAGECONFIG[concheck] = "--with-libsoup=yes,--with-libsoup=no,libsoup-2.4" > PACKAGECONFIG[modemmanager] = > "--with-modem-manager-1=yes,--with-modem-manager-1=no,modemmanager" > PACKAGECONFIG[ppp] = "--enable-ppp,--disable-ppp,ppp,ppp" >
I don't remember exactly how yocto recipes are supposed to work; is it that "if the modemanager package is included in build, --with-modem-manager-1=yes is explicitly used"? Or is it that "if the modemmanager config option in the networkmanager package is selected, --with-modem-manager-1=yes is explicitly used"? If you want to confirm, in any case, you can just look at the NM package configure/build output, that will tell you whether MM support is being correctly enabled or not. > > 2)nmcli d output :- > DEVICE TYPE STATE > CONNECTION > wwp0s21f0u5i4 wwan disconnected > ---- > > Why my connection type is coming as wwan ? > but we are giving nmcli commands considering as type gsm > If I'm not mistaken, you should see a "cdc-wdm0" device type "gsm" once your modem is correctly detected by the MM+NM combo. That's why I'm asking to confirm the build options used in NM. -- Aleksander https://aleksander.es _______________________________________________ ModemManager-devel mailing list ModemManager-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
