> > I tried compiling that cuskit patch, but my laptop crashed and no matter > > what i did i ended up with segfaults. Apparently i've been hit by a > > kernel-bug which sidetracked me about 10 hours: > > https://lkml.org/lkml/2021/5/9/67 > > No wonder the produced binaries were throwing segfaults and my browser > > suddenly bailed out.. When inspecting stuff manually lots of the data > > written recently was just utter garbage.. > > > > With that sorted (reverted the mentioned commit, cloned git repos again) I > > patched mainline libqmi with the two commits you had, compiled and > > installed everything into default prefix /usr/local. > > > > After that i could run: > > $ sudo qmicli -p -d /dev/wwan0p2MBIM --device-open-mbim > > --dms-dell-cuskit-unlock=00 > > [11 maj 2021, 23:42:36] -Warning ** [/dev/wwan0p2MBIM] couldn't detect > > transport type of port: couldn't detect device driver > > [11 maj 2021, 23:42:36] -Warning ** [/dev/wwan0p2MBIM] requested MBIM mode > > but unexpected transport type found > > [/dev/wwan0p2MBIM] Successfully run Dell cuskit unlock > > > > I've attached the log from ModemManager and i can see a ton of stuff > > happening after i send that command with cuskit, but i haven't had time to > > go through it in detail yet. I did see "registered" in the logs though so > > i'm hoping we're making progress, although I don't know for sure.. > > For some reason NetworkManager isn't detecting the interface so i can't > > test it. (I tried simple-connect with modem-manager but that failed, seems > > like simple-connect isn't supported by the card?) > > > > I have tried adding a GSM connection: > > $ nmcli conn add type gsm ifname mhi_mbim0 con-name wwan gsm.apn > > data.tre.se gsm.pin 7470 > > AFAIK, ifname is the name of the 'logical' network device, as reported > by `nmcli d`. ModemManager uses the name of the 'primary' port to > expose the modem/WWAN, so in your case, I assume you should point to > wwan0p2MBIM (the primary port), instead of mhi_mbim0 (the network > interface).
Or even easier; just completely skip the name of the port and create a generic "gsm" connection setting not bound to any specific device. $ nmcli conn add type gsm con-name wwan gsm.apn data.tre.se gsm.pin 7470 -- Aleksander https://aleksander.es _______________________________________________ ModemManager-devel mailing list ModemManager-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
