A fellow SpotMogger with a Moss Box +8 has a problem with the starter solenoid pulsating. It works properly with a direct electrical feed.
There is a relay between the starter switch and the solenoid. The solenoid also works if the relay is bypassed. As you might expect, the relay output lead is thicker than its input lead. He asked me if the relay could be dispensed with. I pointed out that the starter switch may then suffer from carrying too much current. Any thoughts anyone? Cheers, Brian of SpotMog ------------------------------------------- View posts on The Mail Archive http://www.mail-archive.com/[email protected]/ [http://www.mail-archive.com/[email protected]/] Modify Your Subscription: https://www.listbox.com/member/?member_id=22459785&id_secret=22459785-4a39ddf8 Powered by Listbox: http://www.listbox.com
