On 10/10/2012 1:16 PM, Len Conrad wrote: > the doc says: > > check process radiusd with pidfile /var/run/radiusd.pid > start program = "/etc/init.d/freeradius start" > stop program = "/etc/init.d/freeradius stop" > if failed host 127.0.0.1 port 1812 type udp protocol radius > secret testing123 > then alert > > my config is (monit 5.5, fbsd 8.2), xxx.4.63.16 is the local host: > > check process rad1.xxx.net-RADIUS with pidfile /var/run/radiusd.pid > start program = "/usr/local/etc/rc.d/radiusd start" > stop program = "/usr/local/etc/rc.d/radiusd stop" > if failed host xx.4.62.16 port 1812 type udp protocol radius > secret testing123 > then alert > > this always fails, from the monit.log: > > [CDT Oct 10 13:11:49] error : 'rad1.xxx.net-RADACCT' failed protocol test > [RADIUS] at INET[xx.4.62.16:1812testing123] via UDP -- RADIUS: error sending > query -- No route to host > > Len
Is the network intended to be different? Third octet 62 vs 63? -- Noel Jones -- To unsubscribe: https://lists.nongnu.org/mailman/listinfo/monit-general
