>On 10/10/2012 1:16 PM, Len Conrad wrote: >> the doc says: >> >> check process radiusd with pidfile /var/run/radiusd.pid >> start program = "/etc/init.d/freeradius start" >> stop program = "/etc/init.d/freeradius stop" >> if failed host 127.0.0.1 port 1812 type udp protocol radius >> secret testing123 >> then alert >> >> my config is (monit 5.5, fbsd 8.2), xxx.4.63.16 is the local host: >> >> check process rad1.xxx.net-RADIUS with pidfile /var/run/radiusd.pid >> start program = "/usr/local/etc/rc.d/radiusd start" >> stop program = "/usr/local/etc/rc.d/radiusd stop" >> if failed host xx.4.62.16 port 1812 type udp protocol radius >> secret testing123 >> then alert >> >> this always fails, from the monit.log: >> >> [CDT Oct 10 13:11:49] error : 'rad1.xxx.net-RADACCT' failed protocol test >> [RADIUS] at INET[xx.4.62.16:1812testing123] via UDP -- RADIUS: error sending >> query -- No route to host >> >> Len > >Is the network intended to be different? Third octet 62 vs 63?
a typo, should be xx.69.4.62.16 Len > -- Noel Jones > >-- >To unsubscribe: >https://lists.nongnu.org/mailman/listinfo/monit-general -- To unsubscribe: https://lists.nongnu.org/mailman/listinfo/monit-general
