Tod, I use vice grips to hold nuts when I'm temporarily unavailable or when my arms aren't long enough. It might bop you on the head if it pops loose, but it won't entangle you. Take your choice! Bill Riker M-15 #184 Storm Petrel -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of [EMAIL PROTECTED] Sent: July 10, 2893 6:44 PM To: Montgomery Boats Subject: M_Boats: duct tape: due caution A word of warning to those who may be tempted to use this duct-taped wrench technique: While laying on my back, slid head first down the quarterberth, I became entangled in a length of tape. Had I used as little as a couple more inches of tape, I might not have had the strength to free myself. In other words, I might have been duct-taped under the cockpit permanently. *S* Tod
- Re: M_Boats: re: bottom on my M17 Loyd Myers
- Re: M_Boats: unusual interior Ed Armstrong
- Re: M_Boats: M23 lon zimmerman
- Re: M_Boats: M17 tow vehicle Roberta & Mark Dvorscak
- RE: M_Boats: M17 tow vehicle Bill Riker
- Re: M_Boats: truck to trailer wiring Howard A
- Re: M_Boats: M17 rigging questions Dan White
- Re: M_Boats: truck to trailer wiring Fritz Stuneck
- Re: M_Boats: typical hitch ball diameter mikit
- Re: M_Boats: duct tape wins again! Loyd Myers
- Re: M_Boats: The Oakland Race- We may need a 1... Bill Riker
- Re: M_Boats: The Oakland Race- We may need a 1... Peter Jacobs
- Re: M_Boats: CBR-2001 Howard A
- Re: M_Boats: free blue M15 masthead streamer rc2222
- Re: M_Boats: Montgomerys sweep the SCA Cruiser... Bob
- Re: M_Boats: ode to a beautiful stern Doug Kelch
- Re: M_Boats: Noisy CB, + Loyd Myers
- Re: M_Boats: Noisy CB, + mikit
- Re: M_Boats: Noisy CB, + Howard A
- Re: M_Boats: Halyard approximate lengths Eugene Lodrini
- Re: M_Boats: dia, blocks, bowsprit Eugene Lodrini
