Send Motion-user mailing list submissions to
motion-user@lists.sourceforge.net
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/motion-user
or, via email, send a message with subject or body 'help' to
motion-user-requ...@lists.sourceforge.net
You can reach the person managing the list at
motion-user-ow...@lists.sourceforge.net
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Motion-user digest..."
Today's Topics:
1. Can?t open motion log file. (Adam Briggs)
2. Re: Can?t open motion log file. (tosiara)
3. Re: Can?t open motion log file. (Adam Briggs)
4. Re: Motion - Very low fps ( 1 fps ) using cctv card geovision
(tosiara)
----------------------------------------------------------------------
Message: 1
Date: Sat, 24 Feb 2018 18:14:42 +0000 (UTC)
From: Adam Briggs <adbr...@yahoo.com>
To: Motion Discussion List <motion-user@lists.sourceforge.net>
Subject: [Motion-user] Can?t open motion log file.
Message-ID: <196432630.4864075.1519496082...@mail.yahoo.com>
Content-Type: text/plain; charset="utf-8"
Hello, has anyone had trouble opening the Motion log file in the latest Raspian
update??
Thanks,Adam.?
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
Message: 2
Date: Sat, 24 Feb 2018 23:14:03 +0200
From: tosiara <tosi...@gmail.com>
To: Motion discussion list <motion-user@lists.sourceforge.net>
Subject: Re: [Motion-user] Can?t open motion log file.
Message-ID:
<cachtdwqojhuzwozt31f3jqym4hf1jz+tmf4hs9uaoysviym...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
What issue do you have?
On Sat, Feb 24, 2018 at 8:14 PM, Adam Briggs via Motion-user <
motion-user@lists.sourceforge.net> wrote:
> Hello, has anyone had trouble opening the Motion log file in the latest
> Raspian update?
>
>
> Thanks,Adam.
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Motion-user mailing list
> Motion-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/motion-user
> https://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
Message: 3
Date: Sat, 24 Feb 2018 21:23:39 +0000 (UTC)
From: Adam Briggs <adbr...@yahoo.com>
To: Motion discussion list <motion-user@lists.sourceforge.net>
Subject: Re: [Motion-user] Can?t open motion log file.
Message-ID: <108730969.4918964.1519507419...@mail.yahoo.com>
Content-Type: text/plain; charset="utf-8"
Hello, The RaspberryPi is not able to open the Motion log with Leafpad it just
sets there blank and eventually says leafpad not responding.?
Thanks,Adam.?
On Saturday, February 24, 2018, 3:14 PM, tosiara <tosi...@gmail.com> wrote:
What issue do you have?
On Sat, Feb 24, 2018 at 8:14 PM, Adam Briggs via Motion-user
<motion-user@lists.sourceforge.net> wrote:
Hello, has anyone had trouble opening the Motion log file in the latest Raspian
update??
Thanks,Adam.?
------------------------------ ------------------------------ ------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
______________________________ _________________
Motion-user mailing list
Motion-user@lists.sourceforge. net
https://lists.sourceforge.net/ lists/listinfo/motion-user
https://motion-project.github. io/
Unsubscribe: https://lists.sourceforge.net/ lists/options/motion-user
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org!
http://sdm.link/slashdot_______________________________________________
Motion-user mailing list
Motion-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/motion-user
https://motion-project.github.io/
Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
Message: 4
Date: Sat, 24 Feb 2018 23:26:16 +0200
From: tosiara <tosi...@gmail.com>
To: Motion discussion list <motion-user@lists.sourceforge.net>
Subject: Re: [Motion-user] Motion - Very low fps ( 1 fps ) using cctv
card geovision
Message-ID:
<CACHTdwTGbYOwAd7F=UxHC4C39nuX=g2u7opslj2rxkryavt...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
I have no experience with such devices, so would like to clear some things
Is it providing only a single V4L device, /dev/video0? If yes, can it be
opened from more than one process?
Is there a way you can run 4 ffmpeg capture commands? If yes, what
framerate do you get with ffmpeg?
On Sat, Feb 24, 2018 at 12:49 AM, MrDave <motionmrd...@gmail.com> wrote:
> You can also try is to increase the roundrobin_frames but that is a
> balancing act.
>
>
> What happens is that Motion selects a particular input source from the
> camera, captures the requested number of round_robin frames, then opens up
> the next input source, clears out the buffer from the camera (because it
> still has the previous input source), then captures a new round_robin
> number of frames and so forth.
>
>
> So as the number of sources specified on the device go up, the number of
> time that is spent opening / resetting / clearing the butter goes up and
> frame rate goes down. But if the roundrobin_frames is set high, then there
> will be frames missed on the input sources that are not active.
>
>
> The other option would be to change the default hard coded value of the
> buffer size inside the source code. The current default is (and has always
> been) four. You can change that to the minimum of two.....Or revise the
> code to not clear the buffer.....Or change the code to have it skip certain
> changes that can occur but you know are not applicable to your device.....
>
>
> Dave
>
> On 2/23/2018 11:38 AM, Alves Alves wrote:
>
> Yes, the card is at 320x240, and I tested many palettes, including
> UYVY, YUYV, YU12, wich one of it is the raw pixew format?
>
> Host: linux mint 17 MATE 64-bit
> kernel 3.13.0-24-generic
> RAM 1GB, 50% of use
> CPU Semprom 3000+ 1,8 GHz, about 10% of use
> HDD 30GB
>
> Capture card photo (Geovision Gv250):
> https://http2.mlstatic.com/placa-capture-geovision-gv250-
> p4-cmeras-acesso-internet-D_NQ_NP_204905-MLB25096951777_102016-F.jpg
>
> Capture card chip:
> lspci | grep Video
> 00:09.0 Multimedia video controller: Brooktree Corporation Bt878 Video
> Capture (rev 11)
>
> Kernel Modules:
> lsmod | grep bttv
> bttv 139212 1
> btcx_risc 13640 1 bttv
> tveeprom 21216 1 bttv
> videobuf_dma_sg 19262 1 bttv
> rc_core 28124 1 bttv
> v4l2_common 15681 1 bttv
> videobuf_core 26023 2 bttv,videobuf_dma_sg
> videodev 134688 3 bttv,v4l2_common
> i2c_algo_bit 13413 1 bttv
>
> This card is set up as bttv number 150 (008a:763c).
>
> ------------------------------
> *De:* tosiara <tosi...@gmail.com> <tosi...@gmail.com>
> *Enviado:* sexta-feira, 16 de fevereiro de 2018 16:20
> *Para:* Motion discussion list
> *Assunto:* Re: [Motion-user] Motion - Very low fps ( 1 fps ) using cctv
> card geovision
>
> Are all of your 4 cameras 320x240 and using raw pixel format?
> What are the host hardware specs? Which OS?
>
> On Wed, Feb 14, 2018 at 5:51 PM, Alves Alves <anaaparecida...@outlook.com>
> wrote:
>
> Hello, of course
> motion.conf
> https://pastebin.com/raw/GFmyemuC
> one of the cameras
> https://pastebin.com/raw/KegAQWtY
>
> the log (~1MB)
> https://mega.nz/#!LksTDKTR!UfimpMKDbXoRadbwJKhlFktTv2NJa36xELiIzhtEXso
>
>
> I changed many of the options to get more fps, but it doesnt get more than
> 1
> Its ok that web stream is at 1 fps, but i need that videos files can get 3
> or more.
> thanks!
>
> ------------------------------
> *De:* Alves Alves <anaaparecida...@outlook.com>
> *Enviado:* ter?a-feira, 13 de fevereiro de 2018 09:37
> *Para:* motion-user@lists.sourceforge.net
> *Assunto:* [Motion-user] Motion - Very low fps ( 1 fps ) using cctv card
> geovision
>
> Hello, I setup a 4 channel geovision pci card and motion to capture the
> streams, but the frame rate is always 1 fps, i can get 6 fps with
> zoneminder using the 4 cameras, but cant get more than 1 with motion, my
> settings in motion.conf are ok, what can be the issue with motion or image
> drivers?
> Thanks!
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Motion-user mailing list
> Motion-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/motion-user
> https://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>
>
>
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>
>
>
> _______________________________________________
> Motion-user mailing
> listMotion-user@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/motion-userhttps://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>
>
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Motion-user mailing list
> Motion-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/motion-user
> https://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
------------------------------
Subject: Digest Footer
_______________________________________________
Motion-user mailing list
Motion-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/motion-user
------------------------------
End of Motion-user Digest, Vol 140, Issue 33
********************************************
