Send Motion-user mailing list submissions to
motion-user@lists.sourceforge.net
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/motion-user
or, via email, send a message with subject or body 'help' to
motion-user-requ...@lists.sourceforge.net
You can reach the person managing the list at
motion-user-ow...@lists.sourceforge.net
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Motion-user digest..."
Today's Topics:
1. Re: Camera config settings (Rob Kurtz)
2. Re: Camera config settings (tosiara)
3. Re: Camera config settings (Rob Kurtz)
----------------------------------------------------------------------
Message: 1
Date: Thu, 30 Jan 2020 11:22:54 -0700
From: Rob Kurtz <r...@robkurtz.net>
To: motion-user@lists.sourceforge.net
Subject: Re: [Motion-user] Camera config settings
Message-ID: <10366a60-94cc-d841-c81a-1b6f1a50c...@robkurtz.net>
Content-Type: text/plain; charset="utf-8"; Format="flowed"
@motion_detection comes from the /etc/motioneye/camera-1.conf file
created when adding a new camera, in my case line #6
# @webcam_resolution 100 # #@upload_subfolders on
# @upload_server
# @enabled on
# @network_server
# @motion_detection on
# @upload_port
# @upload_location
# @preserve_movies 0
# @network_username
# @upload_movie on
# @id 1
# @webcam_server_resize off
# @upload_password
# @manual_record off
# @upload_method post
# @upload_picture on
# @working_schedule_type during
# @network_password
# @upload_service ftp
# @preserve_pictures 0
# @storage_device custom-path
# @manual_snapshots on
# @network_share_name
# @upload_enabled off
# @network_smb_ver 1.0
# @working_schedule -|-|17:10-17:14|-|-|-|-
# @clean_cloud_enabled off
# @upload_username
enable_motion came from this github issue:
https://github.com/ccrisan/motioneye/issues/766
Rob Kurtz
Sent from wct
On 1/29/2020 11:20 PM, tosiara wrote:
> There are no such config options. Where did you get them?
> https://motion-project.github.io/motion_config.html
>
> On Wed, Jan 29, 2020 at 10:04 PM Rob Kurtz <r...@robkurtz.net
> <mailto:r...@robkurtz.net>> wrote:
>
> I am trying to find information on parameters specified in my
> camera.conf file.
>
> Specifically @motion_detection
>
> I had also read somewhere about adding in an additional parameter
> within
> the "Extra Motion Options", "enable_motion", but I can't seem to find
> any relevant info on a listing of "extra motion options" and what
> those
> options may entail.
>
>
> --
>
> Rob Kurtz
> Sent from wct
>
>
>
> _______________________________________________
> Motion-user mailing list
> Motion-user@lists.sourceforge.net
> <mailto:Motion-user@lists.sourceforge.net>
> https://lists.sourceforge.net/lists/listinfo/motion-user
> https://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>
>
>
> _______________________________________________
> Motion-user mailing list
> Motion-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/motion-user
> https://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-use
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
Message: 2
Date: Thu, 30 Jan 2020 21:58:37 +0200
From: tosiara <tosi...@gmail.com>
To: Motion discussion list <motion-user@lists.sourceforge.net>
Subject: Re: [Motion-user] Camera config settings
Message-ID:
<cachtdwsadnrnb6gy35ogocjxrxj8-rmdgh3dxvkoyvhnc3d...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
Motioneye is a separate project that uses motion as backend. Your question
is related to Motioneye configuration so it is better to ask on Motioneye's
github
On Thu, Jan 30, 2020, 20:23 Rob Kurtz <r...@robkurtz.net> wrote:
> @motion_detection comes from the /etc/motioneye/camera-1.conf file created
> when adding a new camera, in my case line #6
> # @webcam_resolution
> 100
> # #@upload_subfolders on
> # @upload_server
> # @enabled on
> # @network_server
> # @motion_detection on
> # @upload_port
> # @upload_location
> # @preserve_movies 0
> # @network_username
> # @upload_movie on
> # @id 1
> # @webcam_server_resize off
> # @upload_password
> # @manual_record off
> # @upload_method post
> # @upload_picture on
> # @working_schedule_type during
> # @network_password
> # @upload_service ftp
> # @preserve_pictures 0
> # @storage_device custom-path
> # @manual_snapshots on
> # @network_share_name
> # @upload_enabled off
> # @network_smb_ver 1.0
> # @working_schedule -|-|17:10-17:14|-|-|-|-
> # @clean_cloud_enabled off
> # @upload_username
>
>
> enable_motion came from this github issue:
>
> https://github.com/ccrisan/motioneye/issues/766
>
>
> Rob Kurtz
> Sent from wct
>
> On 1/29/2020 11:20 PM, tosiara wrote:
>
> There are no such config options. Where did you get them?
> https://motion-project.github.io/motion_config.html
>
> On Wed, Jan 29, 2020 at 10:04 PM Rob Kurtz <r...@robkurtz.net> wrote:
>
>> I am trying to find information on parameters specified in my
>> camera.conf file.
>>
>> Specifically @motion_detection
>>
>> I had also read somewhere about adding in an additional parameter within
>> the "Extra Motion Options", "enable_motion", but I can't seem to find
>> any relevant info on a listing of "extra motion options" and what those
>> options may entail.
>>
>>
>> --
>>
>> Rob Kurtz
>> Sent from wct
>>
>>
>>
>> _______________________________________________
>> Motion-user mailing list
>> Motion-user@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/motion-user
>> https://motion-project.github.io/
>>
>> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>>
>
>
> _______________________________________________
> Motion-user mailing
> listMotion-user@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/motion-userhttps://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-use
>
> _______________________________________________
> Motion-user mailing list
> Motion-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/motion-user
> https://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
Message: 3
Date: Thu, 30 Jan 2020 13:30:42 -0700
From: Rob Kurtz <r...@robkurtz.net>
To: motion-user@lists.sourceforge.net
Subject: Re: [Motion-user] Camera config settings
Message-ID: <ed388d97-6b85-b4b4-dc4e-70058dfd3...@robkurtz.net>
Content-Type: text/plain; charset="utf-8"; Format="flowed"
Thank you for the clarification. I am obviously new to the landscape and
appreciate the guidance.
Rob Kurtz
Sent from wct
On 1/30/2020 12:58 PM, tosiara wrote:
> Motioneye is a separate project that uses motion as backend. Your
> question is related to Motioneye configuration so it is better to ask
> on Motioneye's github
>
> On Thu, Jan 30, 2020, 20:23 Rob Kurtz <r...@robkurtz.net
> <mailto:r...@robkurtz.net>> wrote:
>
> @motion_detection comes from the /etc/motioneye/camera-1.conf file
> created when adding a new camera, in my case line #6
>
> # @webcam_resolution 100 # #@upload_subfolders on
> # @upload_server
> # @enabled on
> # @network_server
> # @motion_detection on
> # @upload_port
> # @upload_location
> # @preserve_movies 0
> # @network_username
> # @upload_movie on
> # @id 1
> # @webcam_server_resize off
> # @upload_password
> # @manual_record off
> # @upload_method post
> # @upload_picture on
> # @working_schedule_type during
> # @network_password
> # @upload_service ftp
> # @preserve_pictures 0
> # @storage_device custom-path
> # @manual_snapshots on
> # @network_share_name
> # @upload_enabled off
> # @network_smb_ver 1.0
> # @working_schedule -|-|17:10-17:14|-|-|-|-
> # @clean_cloud_enabled off
> # @upload_username
>
>
> enable_motion came from this github issue:
>
> https://github.com/ccrisan/motioneye/issues/766
>
>
> Rob Kurtz
> Sent from wct
>
> On 1/29/2020 11:20 PM, tosiara wrote:
>> There are no such config options. Where did you get them?
>> https://motion-project.github.io/motion_config.html
>>
>> On Wed, Jan 29, 2020 at 10:04 PM Rob Kurtz <r...@robkurtz.net
>> <mailto:r...@robkurtz.net>> wrote:
>>
>> I am trying to find information on parameters specified in my
>> camera.conf file.
>>
>> Specifically @motion_detection
>>
>> I had also read somewhere about adding in an additional
>> parameter within
>> the "Extra Motion Options", "enable_motion", but I can't seem
>> to find
>> any relevant info on a listing of "extra motion options" and
>> what those
>> options may entail.
>>
>>
>> --
>>
>> Rob Kurtz
>> Sent from wct
>>
>>
>>
>> _______________________________________________
>> Motion-user mailing list
>> Motion-user@lists.sourceforge.net
>> <mailto:Motion-user@lists.sourceforge.net>
>> https://lists.sourceforge.net/lists/listinfo/motion-user
>> https://motion-project.github.io/
>>
>> Unsubscribe:
>> https://lists.sourceforge.net/lists/options/motion-user
>>
>>
>>
>> _______________________________________________
>> Motion-user mailing list
>> Motion-user@lists.sourceforge.net
>> <mailto:Motion-user@lists.sourceforge.net>
>> https://lists.sourceforge.net/lists/listinfo/motion-user
>> https://motion-project.github.io/
>>
>> Unsubscribe:https://lists.sourceforge.net/lists/options/motion-use
> _______________________________________________
> Motion-user mailing list
> Motion-user@lists.sourceforge.net
> <mailto:Motion-user@lists.sourceforge.net>
> https://lists.sourceforge.net/lists/listinfo/motion-user
> https://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>
>
>
> _______________________________________________
> Motion-user mailing list
> Motion-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/motion-user
> https://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
------------------------------
Subject: Digest Footer
_______________________________________________
Motion-user mailing list
Motion-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/motion-user
------------------------------
End of Motion-user Digest, Vol 163, Issue 10
********************************************
