Hi,
The dist10-code is part of the ISO 13818 standard.
So everyone can go to a good library and copy the standard.
(Here in Germany you need papers from a university or you
have to pay money ... but basically you can get this code
without any problems - and without hacking.)
If you look into the original dist10-Readme you'll find :
| ISO MPEG Audio Subgroup Software Simulation Group (1996)
| ISO 13818-3.2 MPEG-2 Audio Codec
|
| $Id: readme.1st 1.10 1997/01/28 12:00:48 de Bont Exp $
|
| $Log: readme.1st $
| Revision 1.10 1997/01/19 23:00:48 de Bont
| Distribution 10. Bug fixes and compliance to 13818-3.2
The standard was published in 1995. The first version of
The dist-Code was programmed 1995/06/16. I can't say when
and which version of the dist-Code was released with the
standard, but I'll have a look when I'm going to the
library next time.
Sincerly
Christian Schepke
> >
> > I thought the ISO source code was freely available from Fraunhofer's ftp
> > site well before SoloH released his encoder, but then it was a few years
> > ago now and time maybe playing tricks.
>
> The ISO sources are avaliable at
>
>ftp://ftp.tnt.uni-hannover.de/pub/MPEG/audio/mpeg2/software/technical_report/dist10.tar.gz
> from year 1997 on and will probably stay there for a while.
--
Christian Schepke Tel.: +49 (0)231 39 88 99 3
Lehrstuhl fuer Kommunikationstechnik
Universitaet Dortmund [EMAIL PROTECTED]
--
MP3 ENCODER mailing list ( http://geek.rcc.se/mp3encoder/ )
