Today you sent me mail regarding Re: [rrd-developers] Re: Hourly stats...: *> > *> > DEF:vname=rrd:ds-name:CF[:seconds] *> > *> *> If possible, it should also be possible to use a resolution that *> is too high for the graph. *> *> Suppose I have samples every 10 seconds, and would like to use *> these samples to calculate the maximum value in one period, *> it would not be good to first average the values (as it does now) *> *> Example: In my previous mail I described the daily overview. It *> graphs 432 pixels, 20 samples per pixel, for a total of 24 hours. *> The 20 samples are averaged first and only then the maximum value *> is calculated. *> The 2-hour periods are built from 720 samples and since it does not *> graph it is not averaged first (at least, I think that it works this *> way ?). The maxima are therefore higher than in the graph. *> *> This could be solved by adding an extra rra (containing maxima and *> with a lower resolution) but I already have the data available ...
yes I gather this should be no problem ... cheers tobi *> *> Regards, *> Alex *> -- ______ __ _ /_ __/_ / / (_) Oetiker, Timelord & SysMgr @ EE-Dept ETH-Zurich / // _ \/ _ \/ / TEL: +41(0)1-6325286 FAX:...1517 ICQ: 10419518 /_/ \.__/_.__/_/ [EMAIL PROTECTED] http://ee-staff.ethz.ch/~oetiker -- * To unsubscribe from the rrd-developers mailing list, send a message with the subject: unsubscribe to [EMAIL PROTECTED]
