Hello After lots of tries and help from lots of very nice guys, it works but with very unreal illogical result for the temperature, though the real temperature is listed when I do a ANMP walk that's my CFG
# APC UPS Basic Output Status # CFGNAME : [DEVICE_NAME]_basic-out-status WorkDir: c:\mrtg-data\temp LoadMIBs: C:\mrtg-2.9.2\MIBs\apc.mib Target[DEVICE_NAME_batt-temp]: 1.3.6.1.4.1.318.1.1.1.2.2.2.0&1.3.6.1.4.1.318.1.1.1.2.2.2.0:[EMAIL PROTECTED] MaxBytes[DEVICE_NAME_batt-temp]: 100 Title[DEVICE_NAME_batt-temp]: DEVICE_NAME Battery Temperature PageTop[DEVICE_NAME_batt-temp]: <H1>DEVICE_NAME Battery Temperature</H1> #Options[DEVICE_NAME_batt-temp]: gauge, nopercent, absolute YLegend[DEVICE_NAME_batt-temp]: Temp Legend1[DEVICE_NAME_batt-temp]: Temperature Legend2[DEVICE_NAME_batt-temp]: . Legend3[DEVICE_NAME_batt-temp]: Max value per interval on graph Legend4[DEVICE_NAME_batt-temp]: . LegendI[DEVICE_NAME_batt-temp]: UPS Battery Temperature LegendO[DEVICE_NAME_batt-temp]: . these are the first few lines of the file device_name_batt-temp.log 1046730549 25 25 1046730549 0 0 0 0 1046729687 0 0 0 0 1046729400 6 6 26 26 1046729100 4 4 26 26 1046728800 0 0 0 0 1046728500 0 0 0 0 which shows that it does get the right value Any ideas? Thanks and best regards Sameh Ahmed ALS -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
