Three options: 1. use QOS (e.g. CAR) and monitor the QOS rules 2. use netflow instead of mrtg 3. Re-engineer your network with vlans and create sub-interfaces, whilst upgrading to 12.2T for support of Dot1q subinterfaces under snmp...
Daniel J McDonald, CCIE #2495, CNX Lan/Wan Integrator Austin Energy 1.512.322.6739 [EMAIL PROTECTED] -----Original Message----- From: Peter Sanchez [mailto:[EMAIL PROTECTED] Sent: Thursday, March 06, 2003 10:59 AM To: [EMAIL PROTECTED] Subject: [mrtg] Network Usage based on IP?? Hi all. Im in a bit of a jam. I need to know if its possible to monitor network usage based on the IP address and not interface. Reason being, ill have 5-6 different networks all on the same interface and I need to monitor each individual network. The router is a cisco 806 (Full IOS, 12.2(4)). Thanks for any help you can give! Peter -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
