By Default, MRTG reports in Bytes. You want to change this to bits by adding it into your config file (global parameters): Options[_]: bits
This will show 544.1kB/s as 4352.8kb (or 4.352Mb). The config file may still show the MAX speed as being 12500000 (representing Bytes), but your graphs should reflect 100Mb. Jeremy > The only problem that I have is that it appears to be a > decimal place off in all the HTML. > > Example: > > HTML Report says: > Max In: 544.1 kB/s (4.4%) Average In: 495.4 kB/s > (4.0%) Current In: 544.1 kB/s (4.4%) > > The numbers should be 5.441 MB etc. The decimal place is off in this > manner on all ports that are being reported on. > > Also The MAX speeds are all wrong. > > I have 3 active interfaces: > > FastEthernet0/0 - 12.5 MBytes/s (should be 100MB) > Hssi2/0 - Max Speed: 1500.0 kBytes/s (should be 12 MB) > Hssi3/0 - Max Speed: 1500.0 kBytes/s (should be 12 MB) > > I have read though the online docs and not found any help, If I have > missed docs that can help I would be happy if someone could point me in > the right direction. > > Thanks!!! > Phil Carroll -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
