Hello Yes, I've installed the SNMP4W2K package...and I can use getif to see the basic SNMP info, Location, contact, etc. but the MRTG CPU graph returns the noSuchName error. This is a W2K server with a single processor. Where should the snmp settings be configured for the server? Under the SNMP service correct? Thanks very much. Maybe someone could past a copy of a similar config file. Thanks.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Wednesday, August 27, 2003 3:59 PM To: 'MRTG Mailing List' Subject: [mrtg] Re: w2K server monitoring Hello Jason, The default SNMP support within Windows 2000 may not support these values. Have you installed the package mentioned below "SNMP4W2k"? That is what you need. After you install that, you should be able to see the values.j -- Best regards, John Wednesday, August 27, 2003, 2:30:20 PM, you wrote: JH> Hello JH> When I use the somix w2k cpu template, and change all of the variables JH> within the cfg file, including the community name, and I've gone into the JH> SNMP service on my server and set the community string to match, yet when I JH> run this cpu config file I get the noSuchName error. Please help. JH> -----Original Message----- JH> From: Cornwell, Eric J. [mailto:[EMAIL PROTECTED] JH> Sent: Wednesday, August 27, 2003 9:17 AM JH> To: 'Jason Humes'; 'MRTG Mailing List' JH> Subject: RE: [mrtg] w2K server monitoring JH> Jason, JH> There is a great utility that I used to help me monitor my Win2k machine JH> called SNMP4W2K (http://www.wtcs.org/snmp4tpc/snmp4w2k.htm). After that I JH> just used Getif to walk the device and found the processor oid. For mine it JH> was, 1.3.6.1.2.1.25.3.3.1.2.1. I don't know if this is available without JH> SNMP4W2K, but it might be. JH> I hope this helps. JH> Eric JH> -----Original Message----- JH> From: Jason Humes [mailto:[EMAIL PROTECTED] JH> Sent: Wednesday, August 27, 2003 9:10 AM JH> To: 'MRTG Mailing List' JH> Subject: [mrtg] w2K server monitoring JH> Hello JH> Does anyone know how to get my W2K server setup to allow me to monitor CPU JH> usage on it. I've installed the SNMP network service and set the community JH> string and tried using the template from somix but I get errors when I run JH> the cfg file. Please help. Thanks JH> Jason D. Humes JH> Applied Computer Solutions Inc. JH> 3020 St. Etienne Blvd. JH> Windsor, Ontario JH> Phone: (519) 944-4300 x211 JH> Fax : (519) 944-4247 JH> Email : [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> JH> ********************************************************************** JH> Confidentiality Notice: JH> The information contained in this e-mail and any attachments may be legally JH> privileged and confidential. If you are not an intended recipient, you are JH> hereby notified that any dissemination, distribution or copying of this JH> e-mail and any attachments is strictly prohibited. If you received this JH> e-mail in error, please notify the sender and permanently delete the e-mail JH> and any attachments immediately. You should not retain, copy or use this JH> e-mail or any attachment for any purpose, nor disclose all or any part of JH> the contents to any other person. JH> Thank you. JH> -- JH> Unsubscribe mailto:[EMAIL PROTECTED] JH> Archive http://www.ee.ethz.ch/~slist/mrtg JH> FAQ http://faq.mrtg.org Homepage http://www.mrtg.org JH> WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi JH> -- JH> Unsubscribe mailto:[EMAIL PROTECTED] JH> Archive http://www.ee.ethz.ch/~slist/mrtg JH> FAQ http://faq.mrtg.org Homepage http://www.mrtg.org JH> WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
