Below is the config that works for me. ================================ Target[CPU1]: .1.3.6.1.4.1.311.1.1.3.1.1.2.1.3.1.48&.1.3.6.1.4.1.311.1.1.3.1.1.2.1.3.1.48:[EMAIL PROTECTED] RouterUptime[CPU1]: [EMAIL PROTECTED] MaxBytes[CPU1]: 100 Title[cpu1]: CPU1 PageTop[CPU1]: <H1>localhost CPU Utilization</H1> ShortLegend[CPU1]: % YLegend[CPU1]: CPU Utilization Legend1[CPU1]: CPU Utilization in % (Load) Legend2[CPU1]: LegendI[CPU1]: Load: LegendO[CPU1]: Options[CPU1]: gauge, integer, nopercent, noo ================================
-- Best regards, John Wednesday, August 27, 2003, 3:15:03 PM, you wrote: JH> Hello JH> Yes, I've installed the SNMP4W2K package...and I can use getif to see the JH> basic SNMP info, Location, contact, etc. but the MRTG CPU graph returns the JH> noSuchName error. This is a W2K server with a single processor. Where JH> should the snmp settings be configured for the server? Under the SNMP JH> service correct? Thanks very much. Maybe someone could past a copy of a JH> similar config file. Thanks. JH> -----Original Message----- JH> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] JH> Sent: Wednesday, August 27, 2003 3:59 PM JH> To: 'MRTG Mailing List' JH> Subject: [mrtg] Re: w2K server monitoring JH> Hello Jason, JH> The default SNMP support within Windows 2000 may not support these JH> values. Have you installed the package mentioned below "SNMP4W2k"? JH> That is what you need. After you install that, you should be able to JH> see the values.j -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
