Thanks for the help Woody. So it looks like I'll have to monitor the switch ports individually, instead of the VLANs. Most of the customers are on single ports, although a few use FEC across 2 ports. I can aggregate that traffic by hand if necessary.
Does anyone have a template handy that will pull VLAN information from the ports and/or recognize FEC and aggregate the traffic? Or possibly other suggestions? Garry W. Cook, CCNA Network Infrastructure Manager MACTEC, Inc. - http://www.mactec.com/ 303.308.6228 (Office) - 720.220.1862 (Mobile) > I believe you are correct in your assumptions. You will only > see the first connection setup packets and then the rest may > be switched and not counted from the vlan perspective. We > have seen the same thing here and came to the same conclusion. > > You will need to aggregate, on a per customer basis, to get > want you want using the physical interface metrics. This > probably depends on your provisioning technique. We never > went to the full extent of resolving this ourselves. Good luck. > > Cheers, > Woody... > -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
