Hi Garry, I'm monitoring traffic in diferent VLAN's in a Catalyst 5500 with RSFC's. It seems to be correct. I don't know if there is any diference between RSFC and MSFC...
-----Mensaje original----- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] En nombre de Cook, Garry Enviado el: jueves, 04 de septiembre de 2003 0:02 Para: Erik Denny CC: Woodcock, Bradford; [EMAIL PROTECTED] Asunto: [mrtg] Re: Need to monitor VLAN traffic Yes, I'm successfully monitoring VLANs on the 7200 routers. In fact, this is how I realized there was a problem, as the VLAN graphs on the 7200s and the 6500s did not match up. Also, I do have router blades in the switches, this is where I'm running into the issue. The MSFCs in the 6500 series routers do not report all VLAN traffic, only the setup packets. Garry W. Cook, CCNA Network Infrastructure Manager MACTEC, Inc. - http://www.mactec.com/ 303.308.6228 (Office) - 720.220.1862 (Mobile) > It might be difficult to find, but I know that under the > newer IOS's for > the 7200 class, it IS possible to monitor a vlan's traffic. I'm > successfully doing it currently on 4 routers. > > However, it's apparent that it's not supported on Cisco > switches themselves (unless Garry is lucky enough to have a > router blade in the 6500?). I've also got soem Dell > switches, can't do it there either (and > BTW- I can't get bi-directional data out of my Dells, only 1 > direction at > a time...) > > So, there is hope on the horizon, but it's slow in coming. > But monitoring > BVI's isn't working right though :( > > ..erik > > -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
