Resending in plain text. Is this really necessary?
-----Original Message----- From: Sverre Munthe Sent: 18. oktober 2003 19:24 To: 'Michael Markstaller'; [EMAIL PROTECTED] Subject: RE: [mrtg] Converting syslog to SNMP traps I did, and have downloaded it but embarrassed to say, didn't understand how to use it to make traps. Sverre -----Original Message----- From: Michael Markstaller [mailto:[EMAIL PROTECTED] Sent: 18. oktober 2003 19:06 To: Sverre Munthe; [EMAIL PROTECTED] Subject: RE: [mrtg] Converting syslog to SNMP traps Have a look on Kiwi Syslog Daemon, it's quite valuable for Windows-based syslog and snmp-trap stuff.. regards Michael Markstaller Elaborated Networks GmbH -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Sverre Munthe Sent: Saturday, October 18, 2003 7:02 PM To: [EMAIL PROTECTED] Subject: [mrtg] Converting syslog to SNMP traps I jave a Cisco PIX 515e that I am measuring the NICs, connections and CPU on. And as I can see theres not much more to look at here with SNMP. BUT, I can see from thew documentation that it is possible to send the Syslog as SNMP traps, so I'm doing this, but can't read it using GetIf. I am sending the syslog (informational level) to a PC and the datastream is obviously there (looking at the network traffic), so now all I need Is a tool to convert this dataflow from ordinary syslog to SNMP traps. Any suggestions? Sverre Munthe Oslo Norway -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
