mrtg does not need to see the MIB file - you will have problems monitoring the temperature with the TempTrax using MRTG unless you specify the NoMib2 option in your config - the TempTrax does not support the MIBII system MIB
-----Original Message----- From: Alex Zheng [mailto:[EMAIL PROTECTED] Sent: Friday, October 31, 2003 3:36 PM To: [EMAIL PROTECTED] Subject: [mrtg] question about MIB/tempTrax > > > > > >We had purchased a temperature monitor - TempTrax Model E. The vendor has >a MIB file, but for MRTG to monitor the output of device(i.e., temperature >output) , where should I place the mib file so that mrtg will see? and how >should I generate the cfg file using cfgmaker? > > > > >thanks. > >alex -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi Learn more about Paymentech's payment processing services at www.paymentech.com THIS MESSAGE IS CONFIDENTIAL. This e-mail message and any attachments are proprietary and confidential information intended only for the use of the recipient(s) named above. If you are not the intended recipient, you may not print, distribute, or copy this message or any attachments. If you have received this communication in error, please notify the sender by return e-mail and delete this message and any attachments from your computer. -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
