that error is just what i mentioned - the TempTrax does not support MIBII sysatem MIB - provided you have a recnt version of MRTG you should be able to put the noMib2 option at the beggining of your config file - just under the WorkDir line
-----Original Message----- From: Alex Zheng [mailto:[EMAIL PROTECTED] Sent: Monday, November 03, 2003 1:40 PM To: Fauteux, Joe Cc: [EMAIL PROTECTED] Subject: Re: [mrtg] Re: question about MIB/tempTrax where do you specify noMib2 option? when I do: cfgmaker [EMAIL PROTECTED] (10.10.1.6 is tempTrax sensor' ip address) I got following error: # ./cfgmaker [EMAIL PROTECTED] --base: Get Device Info on [EMAIL PROTECTED]: SNMP Error: Received SNMP response with error code error status: noSuchName index 1 (OID: 1.3.6.1.2.1.1.1.0) SNMPv1_Session (remote host: "10.10.1.6" [10.10.1.6].161) community: "green" request ID: 1809657765 PDU bufsize: 8000 bytes timeout: 2s retries: 5 backoff: 1) at /export/home/mrtg/bin/../lib/mrtg2/SNMP_util.pm line 458 SNMPGET Problem for sysDescr sysContact sysName sysLocation sysObjectID on [EMAIL PROTECTED]: at ./cfgmaker line 673 --base: Vendor Id: --base: Populating confcache --base: Get Interface Info --base: Walking ifIndex --base: Walking ifType --base: Walking ifSpeed --base: Walking ifAdminStatus --base: Walking ifOperStatus # Created by # ./cfgmaker [EMAIL PROTECTED] ### Global Config Options # for UNIX # WorkDir: /home/http/mrtg # or for NT # WorkDir: c:\mrtgdata ### Global Defaults # to get bits instead of bytes and graphs growing to the right # Options[_]: growright, bits ###################################################################### # System: # Description: # Contact: # Location: ###################################################################### At 04:49 AM 11/3/2003, you wrote: >mrtg does not need to see the MIB file - you will have problems monitoring >the temperature with the TempTrax using MRTG unless you specify the NoMib2 >option in your config - the TempTrax does not support the MIBII system MIB > >-----Original Message----- >From: Alex Zheng [mailto:[EMAIL PROTECTED] >Sent: Friday, October 31, 2003 3:36 PM >To: [EMAIL PROTECTED] >Subject: [mrtg] question about MIB/tempTrax > > > > > > > > > > > > > > >We had purchased a temperature monitor - TempTrax Model E. The vendor has > >a MIB file, but for MRTG to monitor the output of device(i.e., temperature > >output) , where should I place the mib file so that mrtg will see? and how > >should I generate the cfg file using cfgmaker? > > > > > > > > > >thanks. > > > >alex > >-- >Unsubscribe mailto:[EMAIL PROTECTED] >Archive http://www.ee.ethz.ch/~slist/mrtg >FAQ http://faq.mrtg.org Homepage http://www.mrtg.org >WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi > > > >Learn more about Paymentech's payment processing services at >www.paymentech.com >THIS MESSAGE IS CONFIDENTIAL. This e-mail message and any attachments are >proprietary and confidential information intended only for the use of the >recipient(s) named above. If you are not the intended recipient, you may >not print, distribute, or copy this message or any attachments. If you >have received this communication in error, please notify the sender by >return e-mail and delete this message and any attachments from your computer. > >-- >Unsubscribe mailto:[EMAIL PROTECTED] >Archive http://www.ee.ethz.ch/~slist/mrtg >FAQ http://faq.mrtg.org Homepage http://www.mrtg.org >WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi Learn more about Paymentech's payment processing services at www.paymentech.com THIS MESSAGE IS CONFIDENTIAL. This e-mail message and any attachments are proprietary and confidential information intended only for the use of the recipient(s) named above. If you are not the intended recipient, you may not print, distribute, or copy this message or any attachments. If you have received this communication in error, please notify the sender by return e-mail and delete this message and any attachments from your computer. -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
