Hello All, In reference to these messages:
http://www.ee.ethz.ch/~slist/mrtg/msg25378.html The OID for cDot11ActiveDevicesTable is 1.3.6.1.4.1.9.9.273.1.1.2.1.1, and it always gives a value back. But sometimes, it will give back a 10-digit number, such as 4294967280. When the AP does not give the 10-digit number, it gives 0, 1, 2 [...], the correct number of clients as viewed through a telnet and www session. We have over 100 Cisco 1200 AP's and this is happening on over half of them. The values are always between 4294967288 and 4294967295. Every one of these AP's run IOS 12.2(13)JA1 (c1200-k9w7-mx.122-13.JA1), and these values were walked with snmpwalk UCD-snmp version: 4.2.6 on FreeBSD 5. I've tried to clear the counters on the interfaces and such, but I haven't figured it out. For the life of me, I cannot find any difference in the config of the AP's. Does anyone have any ideas? Thanks and sorry if this double-posted, David ---------------------------------------- http://openfire.coloradocollege.edu/mrtg -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
