Hi Everyone,
ARRRG! I've been doing this before, but I cannot get it to work now with
the changed OID! I'm pooling the OID for authenticated users on the Cisco
1200AP's IOS, from Vx works, and now getting error messages.
Here is the walk:
[EMAIL PROTECTED]:~]# snmpwalk 10.1.0.9 COMM .1.3.6.1.4.1.9.9.273.1.1.2.1.1
enterprises.9.9.273.1.1.2.1.1.1 = Gauge32: 0
Here is the config file:
WorkDir: /usr/local/www/data/mrtg
Options[_]: growright, transparent, noinfo, gauge, absolute
Background[_]: #cccccc
Target[TUT-12AP-3N2]:
1.3.6.1.4.1.9.9.273.1.1.2.1.1&1.3.6.1.4.1.9.9.273.1.1.2.1.1:[EMAIL PROTECTED]
MaxBytes[TUT-12AP-3N2]: 2048
Title[TUT-12AP-3N2]: TUT-12AP-3N2
YLegend[TUT-12AP-3N2]: TUT-12AP-3N2
LegendI[TUT-12AP-3N2]:
LegendO[TUT-12AP-3N2]:
Legend1[TUT-12AP-3N2]:Client Users Auth to Cisco 1200 AP's
ShortLegend[TUT-12AP-3N2]: Users
PageTop[TUT-12AP-3N2]: <H1>Cisco 1200 AP Auth Client Users</H1>
<TABLE>
<TR><TD>System:</TD><TD>TUT-12AP-3N2 in Tutt</TD></TR>
<TR><TD>Max Sesstions:</TD> <TD>2048 Users</TD></TR>
</TABLE>
...And, here is the error:
[EMAIL PROTECTED]:~]# /usr/local/bin/mrtg /etc/mrtg/mrtg_test.cfg
SNMP Error:
Received SNMP response with error code
error status: noSuchName
index 1 (OID: 1.3.6.1.4.1.9.9.273.1.1.2.1.1)
SNMPv1_Session (remote host: "10.1.0.9" [10.1.0.9].161)
community: "setup"
request ID: 1256114244
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/local/lib/perl5/site_perl/5.6.1/SNMP_util.pm line 487
SNMPGET Problem for 1.3.6.1.4.1.9.9.273.1.1.2.1.1
1.3.6.1.4.1.9.9.273.1.1.2.1.1 sysUptime sysName on
[EMAIL PROTECTED]::::::v4only
at /usr/local/bin/mrtg line 1835
ERROR: Target[tut-12ap-3n2][_IN_] ' $target->[0]{$mode} ' did not eval
into defined data
ERROR: Target[tut-12ap-3n2][_OUT_] ' $target->[0]{$mode} ' did not eval
into defined data
UCD-snmp version: 4.2.6
MRTG 2.10.13
perl-5.6.1_13
gd-1.8.4_6
png-1.2.5_2
I've tried this under 2.9.25 and 2.10.13 and it's the same error
message...Does anyone see errors in my config? I can walk with both SNMP
v1 and v2c (-v 1, -v 2c) in smpwalk and the result is the same data...
Thanks for the help,
David
--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
