[EMAIL PROTECTED] wrote: > Hi, > I need to monitor Cisco Gigabit switch for bandwidth,cpu > utilization and memory utilisation.Would appreciate if anyone > could provide the templates of the configuration file or any > url where i can find good documentation.
I've been working to get some templates to do different things, such as set absmax and SNMP version based on the type of link, add cpu and mem graphs, etc. However, I feel that I have a long way to go yet, and there may be someone out there that can provide what you want right now. If you wish, I'll be happy to provide the templates that I have currently, you may find them useful. In the meantime, have you tried just running cfgmaker against the switch? This should provide the bandwidth graphs that you want right out of the box. However, with GB links there are a few caveats. For one, you'll want to make sure that you are polling with SNMP v.2, otherwise you may end up with counter wraps. Also, if this switch has an MSFC and is being used for MLS, you may not get the actual bandwidth, as only the first packet is compared against the cache and then the rest of the flows are switched in hardware. Garry W. Cook, CCNA Network Infrastructure Manager MACTEC, Inc. - http://www.mactec.com/ 303.308.6228 (Office) - 720.220.1862 (Mobile) -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
