[EMAIL PROTECTED] wrote: > Hi , > > We have a cisco router behind a cisco pix firewall, and when I run the > cfgmaker it does not seem to get a response from the router. > > I can however get satitsitics on the sam network for another > server. So > mrtg installation and computer seems to be fine. > > The ip address for the computer is allowed through the firewall to any > host on the other port of the firewall. > > Any suggestions??
A few things you might want to check: Does the router have an ACL that perhaps blocks SNMP queries, or limits them to certain hosts? (If not, it probably should) Is the SNMP community string set correctly on the router? While the firewall allows your host IP through, perhaps it is blocking the SNMP port? (Probably not, since you can monitor your server) You should definitely check the firewall logs, filter on your host IP if possible, and see if it is dropping any necessary packets. Garry W. Cook, CCNA Network Infrastructure Manager MACTEC, Inc. - http://www.mactec.com/ 303.308.6228 (Office) - 720.220.1862 (Mobile) -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
