As the error message says, the problem is that your SNMP requests are not
receiving a response. Either the SNMP request isn't reaching your Motorola,
theres no SNMP server running on it, the community name is wrong, or some
other similar reason, probably best for you to investigate further...
-----Original Message-----
From: Mohsan Sarwar [mailto:[EMAIL PROTECTED]
Sent: 07 February 2004 08:44
To: [EMAIL PROTECTED]
Subject: [mrtg] Snmp Issue
I want to Mointor the Bandwidth utilization on Motorola canopy,, but it
given me errors Listed below. kindly give me the Solution.
C:\mrtg-2.10.0pre8\bin>perl cfgmaker [EMAIL PROTECTED] --global "WorkDir:
C:\i
etpub\wwwroot\ali" --output 3640.cfg
--base: Get Device Info on [EMAIL PROTECTED]:
SNMP Error:
no response received
SNMPv1_Session (remote host: "169.254.1.1" [169.254.1.1].161)
community: "canopy"
request ID: 1939376997
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
SNMPWALK Problem for 1.3.6.1.2.1.1 on [EMAIL PROTECTED]::::::v4only
WARNING: Skipping [EMAIL PROTECTED]: as no info could be retreived
--base: Writing 3640.cfg
C:\mrtg-2.10.0pre8\bin>
waiting for a positive responce.
Mohsan Sarwar
Wireless Network Engineer,
LEO Broadband.
68-C, Model Town,Lahore.
[EMAIL PROTECTED]
Mobile#0300-4478083
Tel#+92-42-5868947-5858068
Fax#+92-42-5857068
--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
"This communication is intended solely for the addressee and is confidential
and not for third party unauthorised distribution."
--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
