Well then, I would say you might want to look for conflicting SNMP agents. Perhaps it is a name brand box, and you have Insight Manager or OpenManage or something like that? If not, remove and reinstall the SNMP service.
-----Original Message----- I have checked the SNMP service configuration. I have tested it with listed hosts and with "from any hosts." I have made sure that the xp firewall is disabled. The service is running on the ISA server and Getif does return some data but only identifies one of the three nic cards in the server. * You might want to check your SNMP service configuration. By default, Win2k and Win2k3 server will respond to only to hosts listed in the security tab (localhost by default). If you have "from these hosts" selected, you MUST have your monitoring server listed. Also, if you use a NetBIOS or DNS name here, your server must be able to resolve the name. To alleviate both of these issues, you can use the "from any host" to test. * http://www.loriotpro.com/Service&Support/How_to/InstallWXPAgent_EN.php * Neither mib walker is on a server. One is on W2K pro and the other XP. I am not aware of any way to place an ACL on the snmp service running on a server. * Is Solarwinds on another server than GetIf? If so, then perhaps the SNMP service on the target is set to allow SNMP access from the Getif server and not the SolarWindws service. * Yes the solarwinds mib walker is polling on UDP port 161 and can successfully poll other serers. * Is your SNMP poll/walk/whatever from Solarwinds on the same UDP port as GetIf? Or does it poll on another port? Can you use Solarwindws to poll another server to verify settings? * I am having a problem setting up MRTG on ISA server 2000. <SNIP> -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
