My last problem is a unit problem. I configured mrtg to use a Factor of 1024, but this factor only works on the Legends of my graphs.
So, for example, my disk space in the legend is: 4295.3 MB, while the legend on de Y-axis shows 4.4MB Can anybody tell me, how I can multiply the legend on the Y-axis as well, so this will show 4.4GB instead of 4.4MB ?? Below you can find an example of my disk space section in the mrtg.conf thanks in advance! Corstian ### ### Disk space of /dev/hda1 partition on mounted on / ### Target[disk.hda1]: `/home/corstian/bin/mrtg/partition_space /dev/hda1` Options[disk.hda1]: gauge,growright,nopercent Title[disk.hda1]: Disk Usage of /dev/hda1 mounted on / MaxBytes[disk.hda1]: 10000000000 Factor[disk.hda1]: 1024 LegendO[disk.hda1]: Total LegendI[disk.hda1]: Used Legend1[disk.hda1]: Total diskspace Legend2[disk.hda1]: Used diskspace YLegend[disk.hda1]: Bytes ShortLegend[disk.hda1]: B PageTop[disk.hda1]: <H1>Disk Usage of /dev/hda1 mounted on / </H1> -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
