The MaxBytes must be 197632 and are you sure if the interface serial3 is the instance snmp "3"?
Query the router by snmp for value snmp for that interface... Regards... -----Mensaje original----- De: Tracy Bryant [mailto:[EMAIL PROTECTED] Enviado el: Jueves, 04 de Agosto de 2005 11:45 a.m. Para: [EMAIL PROTECTED] Asunto: [mrtg] Values are inconsistent The values that MRTG gives me are not the same as a "show int" does at my router. Below is the configuration for one of the interfaces. Please help! Alos does the port number for snmp matter? Target[*.*.*.*]: 3:[EMAIL PROTECTED] MaxBytes[*.*.*.*]: 193000 Title[*.*.*.*]: Serial(S3): serial3 Options[*.*.*.*]: bits PageTop[*.*.*.*]: <H1>Traffic Analysis for S3</H1> <TABLE> <TR><TD>System:</TD><TD>Cisco 2621 Router</TD></TR> <TR><TD>Maintainer:</TD><TD>WANTeam</TD></TR> <TR><TD>Interface:</TD><TD>serial3 (S3)</TD></TR> <TR><TD>IP:</TD><TD>*.*.*.*</TD></TR> <TR><TD>Max Speed:</TD> <TD>1544.0 kbits/s (ethernetCsmacd)</TD></TR> </TABLE> -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
