On Cisco equipment the SNMP index numbers can shift after a reconfiguration, so by using indexnumbers in your MRTG configfile there is some risk that after a while the indexnumber in the MRTG config don't completely match with the indexnumbers on your target machine.
If you use '--ifref=name' or '--ifref=descr' in the cfgmaker command you get the name of the interface at the targetline. Jan. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Villafuerte Icaza Rodolfo Eduardo Sent: Thursday, August 04, 2005 10:19 PM To: [EMAIL PROTECTED] Subject: [mrtg] Re: Values are inconsistent The MaxBytes must be 197632 and are you sure if the interface serial3 is the instance snmp "3"? Query the router by snmp for value snmp for that interface... Regards... -----Mensaje original----- De: Tracy Bryant [mailto:[EMAIL PROTECTED] Enviado el: Jueves, 04 de Agosto de 2005 11:45 a.m. Para: [EMAIL PROTECTED] Asunto: [mrtg] Values are inconsistent The values that MRTG gives me are not the same as a "show int" does at my router. Below is the configuration for one of the interfaces. Please help! Alos does the port number for snmp matter? Target[*.*.*.*]: 3:[EMAIL PROTECTED] MaxBytes[*.*.*.*]: 193000 Title[*.*.*.*]: Serial(S3): serial3 Options[*.*.*.*]: bits PageTop[*.*.*.*]: <H1>Traffic Analysis for S3</H1> <TABLE> <TR><TD>System:</TD><TD>Cisco 2621 Router</TD></TR> <TR><TD>Maintainer:</TD><TD>WANTeam</TD></TR> <TR><TD>Interface:</TD><TD>serial3 (S3)</TD></TR> <TR><TD>IP:</TD><TD>*.*.*.*</TD></TR> <TR><TD>Max Speed:</TD> <TD>1544.0 kbits/s (ethernetCsmacd)</TD></TR> </TABLE> -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi _________________________________________________________ Het ministerie van Sociale Zaken en Werkgelegenheid sluit elke aansprakelijkheid uit in verband met het niet juist, onvolledig of niet tijdig overkomen van de informatie in deze e-mail. Aan dit bericht kunnen geen rechten worden ontleend. Dit bericht is alleen bestemd voor de geadresseerde. Indien dit bericht niet voor u bestemd is, verzoeken wij u dit onmiddellijk aan ons te melden en de inhoud van dit bericht te vernietigen. _________________________________________________________ The ministry of Social Affairs and Employment is not liable for any incorrect or incomplete transmission of the information in this e-mail or for any delay in its receipt. This message shall not constitute any obligations. This message is intended solely for the addressee. If you have received this message in error, please inform us immediately and delete its content. _________________________________________________________ -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
