Hi all, I am using MRTG to graph traffic on a Foundry chassis. Links act at 1Gb FD.
When I retrieve the ifInOctets and ifOutOctets of one port, graphed traffic does not exceed 13MB/s. I have to multiply the retrieved values by 8 to get a somewhat realistic 100MB/s. My question is : ifInOctets and ifOutOctets should be bytes counters so why do I need to multiply these values by 8 ? (note : I tested the link with data transfert, it really act as a 1Gb link, this is not a hardware misconfiguration) Here is an example target : Directory[tina]: net/tina Title[tina]: tina network PageTop[tina]: tina network</H1> PNGTitle[tina]: Network Utilization Target[tina]: ifInOctets.513&ifOutOctets.513:[EMAIL PROTECTED] * 8 Options[tina]: growright,pngdate,nopercent MaxBytes[tina]: 1342177280 WithPeak[tina]: ymw Thanks, Ionel -- Ionel GARDAIS ~ [EMAIL PROTECTED] Junior System-Network Administrator Phone : +33(0)147088131 Fax : +33(0)147088065 -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
