Hi Eric, I don't want bits/sec, I'd like to have the graph scaled on my real link bandwidth. 104 Mb/s is still the same than 13MB/s (and this is too low for a 1Gb link)
Ionel Eric Brander wrote: >Ionel GARDAIS wrote: > > > >>Hi all, >> >>I am using MRTG to graph traffic on a Foundry chassis. >>Links act at 1Gb FD. >> >>When I retrieve the ifInOctets and ifOutOctets of one port, graphed >>traffic does not exceed 13MB/s. >>I have to multiply the retrieved values by 8 to get a somewhat realistic >>100MB/s. >> >> >> >> >> > >If you want it in bits/second, then just use the "bits" option. Its in >the reference.html. > >HTH, > >Eric Brander > >-- >Unsubscribe mailto:[EMAIL PROTECTED] >Archive http://lists.ee.ethz.ch/mrtg >FAQ http://faq.mrtg.org Homepage http://www.mrtg.org >WebAdmin http://lists.ee.ethz.ch/lsg2.cgi > > > -- Ionel GARDAIS ~ [EMAIL PROTECTED] Junior System-Network Administrator Phone : +33(0)147088131 Fax : +33(0)147088065 -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
