>I recently purchased an APC Environmental monitoring system We have one of these on trial as well, and have successfully hooked it into both MRTG and Nagios.
>same graph. Temp is in Green and Humidity is in Blue. Is there a way >to swap those around as it would make more sense to me to have >the temp be the blue line! Swap the order of the OIDs, or override the colours in your .cfg file. >The second questions is that the APC unit sends it measurements in >Celcius and I'd like to that to Fahrenheit on the graph. Heh... Americans need to modernise :) If you are using rouetrs2.cgi v2.16 for your display, then you can use the 'c2f' option, which will perform and automatic centigrade to farenheight conversion before display. Alternatively, write a wrapper for the SNMP lookup that makes this conversion. >I'm only really interested in seeing the Temp being graphed at this >time... so is there a way to remove the humidity and just see the temp?? Options[]: noo Here is the config that we're using. Note that it contains a lot of extra display options for the routers.cgi frontend - these would be ignored by your system if you don't use routers.cgi. routers.cgi*Extension: "Probe Admin" http://cdcemu1/ _new noopts routers.cgi*RoutingTable: no Target[cdcemu1-probe-temp-1]: 1.3.6.1.4.1.318.1.1.10.3.13.1.1.3.1&1.3.6.1.4.1.31.8.1.1.10.3.13.1.1.6.1:com [EMAIL PROTECTED] Title[cdcemu1-probe-temp-1]: Local probe Temperature MaxBytes[cdcemu1-probe-temp-1]: 100 PageTop[cdcemu1-probe-temp-1]: null LegendI[cdcemu1-probe-temp-1]: Temp: LegendO[cdcemu1-probe-temp-1]: Humid: Legend1[cdcemu1-probe-temp-1]: Temperature Legend2[cdcemu1-probe-temp-1]: Humidity Legend3[cdcemu1-probe-temp-1]: Peak temperature Legend4[cdcemu1-probe-temp-1]: Peak humidity Options[cdcemu1-probe-temp-1]: noo gauge growright YLegend[cdcemu1-probe-temp-1]: Centigrade ShortLegend[cdcemu1-probe-temp-1]: C routers.cgi*Options[cdcemu1-probe-temp-1]: fixunit nomax scaled nopercent nototal routers.cgi*Icon[cdcemu1-probe-temp-1]: temp-sm.gif routers.cgi*InCompact[cdcemu1-probe-temp-1]: no SetEnv[cdcemu1-probe-temp-1]: MRTG_INT_DESCR="Temp Local probe" routers.cgi*Summary[cdcemu1-probe-temp-1]: "Env Monitor" nodetails Target[cdcemu1-probe-humid-1]: 1.3.6.1.4.1.318.1.1.10.3.13.1.1.6.1&1.3.6.1.4.1.3 18.1.1.10.3.13.1.1.3.1:[EMAIL PROTECTED] Title[cdcemu1-probe-humid-1]: Local probe Humidity MaxBytes[cdcemu1-probe-humid-1]: 100 PageTop[cdcemu1-probe-humid-1]: null LegendO[cdcemu1-probe-humid-1]: Temp: LegendI[cdcemu1-probe-humid-1]: Humidity: Legend2[cdcemu1-probe-humid-1]: Temperature Legend1[cdcemu1-probe-humid-1]: Humidity Legend4[cdcemu1-probe-humid-1]: Peak temperature Legend3[cdcemu1-probe-humid-1]: Peak humidity Options[cdcemu1-probe-humid-1]: noo gauge growright YLegend[cdcemu1-probe-humid-1]: Percent ShortLegend[cdcemu1-probe-humid-1]: %RH routers.cgi*Options[cdcemu1-probe-humid-1]: fixunit nomax scaled nopercent nototal routers.cgi*Icon[cdcemu1-probe-humid-1]: drop-sm.gif routers.cgi*InCompact[cdcemu1-probe-humid-1]: no SetEnv[cdcemu1-probe-humid-1]: MRTG_INT_DESCR="Humidity Local probe" routers.cgi*Summary[cdcemu1-probe-humid-1]: "Env Monitor" nodetails routers.cgi*Extension: "Nagios: cdcemu1" /cgi-bin/tonagios.cgi alert-sm.gif If you'd like to see the Nagios configuration template as well, let me know. Hope this helps, Steve -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
