it's all private so this is the actual config:
### Interface 1 >> Descr: 'VLAN1' | Name: 'VL1' | Ip: '192.168.1.10' |
Eth: '00-90-b1-ae-78-80' ###
Target[192.168.1.10_VLAN1]: \VLAN1:[EMAIL PROTECTED]:
SetEnv[192.168.1.10_VLAN1]: MRTG_INT_IP="192.168.1.10"
MRTG_INT_DESCR="VLAN1"
MaxBytes[192.168.1.10_VLAN1]: 1250000
Title[192.168.1.10_VLAN1]: VLAN1
PageTop[192.168.1.10_VLAN1]: <h1>VLAN1</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>bplnoc2916 in </td>
</tr>
<tr>
<td>Maintainer:</td>
<td></td>
</tr>
<tr>
<td>Description:</td>
<td>VLAN1 VLAN1 </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>VL1</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>1250.0 kBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>192.168.1.10 ()</td>
</tr>
</table>
</div>
### Interface 2 >> Descr: 'FastEthernet0/1' | Name: 'Fa0/1' | Ip: '' |
Eth: '00-90-b1-ae-78-81' ###
Target[192.168.1.10_FastEthernet0_1]:
\FastEthernet0/1:[EMAIL PROTECTED]:
SetEnv[192.168.1.10_FastEthernet0_1]: MRTG_INT_IP=""
MRTG_INT_DESCR="FastEthernet0/1"
MaxBytes[192.168.1.10_FastEthernet0_1]: 12500000
Title[192.168.1.10_FastEthernet0_1]: FastEthernet0/1 -- bplnoc2916
PageTop[192.168.1.10_FastEthernet0_1]: <h1>FastEthernet0/1 --
bplnoc2916</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>bplnoc2916 in </td>
</tr>
<tr>
<td>Maintainer:</td>
<td></td>
</tr>
<tr>
<td>Description:</td>
<td>FastEthernet0/1 UpLink to
CableModem RTR </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>Fa0/1</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>12.5 MBytes/s</td>
</tr>
</table>
</div>
On Thu, 2007-01-11 at 20:29 -0600, MrPaul wrote:
> Can you post the MRTG config for one of your interfaces (changing the
> IP and snmp community in the target field would be wise).
> Paul
>
> On 1/11/07, John M. Krumenacker <[EMAIL PROTECTED]> wrote:
> Hello All,
>
> I have configured a 2916 in MRTG (ver 2.15.0).
>
> I see the interface traffic updating on vlan1 only - but all
> the other
> interfaces (all 16 are active) show exactly 35 b/s for the
> last 6 hours
> (since I configured it).
>
> On the 2916 I enabled RO SNMP and nothing else. Didn't feel i
> needed to.
> 15 ports are all auto - one is set to port monitor fa0/1.
> Nothing
> special about this config.
>
> Can anyone enlighten me please?
>
> Thanks
>
> John
>
> --
> Unsubscribe
> mailto:[EMAIL PROTECTED]
> Archive http://lists.ee.ethz.ch/mrtg
> FAQ http://faq.mrtg.org Homepage
> http://www.mrtg.org
> WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
>
>
--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive http://lists.ee.ethz.ch/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
