On 7/18/07, Daniel J McDonald <[EMAIL PROTECTED]> wrote: > On Wed, 2007-07-18 at 01:16 -0700, reena SINGH wrote: > > Dear all, > > i have configured the MRTG Server on the unix machine for multi > > routers. it shows the graph of each interfaces properly. i have > > aggreated some links also. it also show the traffic properly less than > > 930 mbps. but it not showing the traffic more than 930 mbps . it got > > saturated on 930 mbps when trafic goes more than 930mbps. > > i have tried for both SNMP v2 & v4. > > mrtg has no support for snmp v4, whatever that might be. Just 1, 2c, > and 3 > > > for SNMP v2 traffic got saturated on 930 mbps, whereas with SNMP v4 i > > can not get the aggregated traffic. > > When adding 5 interfaces like this, if there are roll-overs, mrtg can't > distinguish which individual counter is rolling over. I can't imagine > this working properly. > > Better would be to create 5 targets, then use routers2.cgi to create a > stacked graph meta-target. > >
Reena, In addition to what Daniel stated I jut wanted to add - Are you sure the MaxBytes setting is correct? 125000000 is only 1000 megabits or depending on how your conversion (kibi vs kilo) 953 megabits. _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
