125000000 bytes (your MaxBytes value) * 8 (bits per byte) = 1Gigabit.
Increase your MaxBytes value.
________________________________
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of reena SINGH
Sent: Wednesday, July 25, 2007 6:31 AM
To: Steve Shipway; [email protected]
Subject: Re: [mrtg] traffic not showing more than 930mbps on the
link
Dear Sir,
I am using SNMPv2. Configuration of the link is as follows:-
Target[routers]: 1:[EMAIL PROTECTED]:::::2 +
2:[EMAIL PROTECTED]:::::2
+ 3:[EMAIL PROTECTED]:::::2
MaxBytes[routers]: 125000000
Title[routers]: Total Speed for the Routers
But it shows the traffic only upto 1 Gb. Whereas traffic of my
link is more than 1Gb.
So, plz help me. can you have any idea that how can i use SNMP
v3.
Thanks & Regards
Reena
Steve Shipway <[EMAIL PROTECTED]> wrote:
It's in the FAQ. You need to use SNMPv2 or SNMPv3
because SNMPv1 only uses 16bit counters, which roll over in the polling
window if you have 1Gb traffic. See the MRTG manual for how to specify
SNMPv2 - you add ':::::2' to the end of the Target definition.
Steve
________________________________
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of reena SINGH
Sent: Saturday, 21 July 2007 22:08
To: [email protected]
Subject: Re: [mrtg] traffic not showing more than
930mbps on the link
Dear all,
Thanks Eric, Thanks Daniel . Now its working properly
with snmp v2 . problem was in MaxBytes setting. By MaxBytes setting
125000000 i can get traffic upto 1000 megabits.
MaxBytes[routers]: 125000000
One thing more, we can aggregate more than 5 interfaces.
Now can anybody suggest me how to get more than 1000
megabits traffic on the link? Is it only depend on MaxBytes setting or i
have to do some more configuration. what will be MaxBytes setting?
Thanks in advance
Reena Singh
New Delhi, India.
On 7/18/07, Daniel J McDonald
<[EMAIL PROTECTED]> wrote:
> On Wed, 2007-07-18 at 01:16 -0700, reena SINGH wrote:
> > Dear all,
> > i have configured the MRTG Server on the unix
machine for multi
> > routers. it shows the graph of each interfaces
properly. i have
> > aggreated some links also. it also show the traffic
properly less
than
> > 930 mbps. but it not showing the traffic more than
930 mbps . it
got
> > saturated on 930 mbps when trafic goes more than
930mbps.
> > i have tried for both SNMP v2 & v4.
>
> mrtg has no support for snmp v4, whatever that might
be. Just 1, 2c,
> and 3
>
> > for SNMP v2 traffic got saturated on 930 mbps,
whereas with SNMP
v4 i
> > can not get the aggregated traffic.
>
> When adding 5 interfaces like this, if there are
roll-overs, mrtg
can't
> distinguish which individual counter is rolling over.
I can't
imagine
> this working properly.
>
> Better would be to create 5 targets, then use
routers2.cgi to create
a
> stacked graph meta-target.
> >
Reena,
In addition to what Daniel stated I jut wanted to add -
Are you sure
the MaxBytes setting is correct? 125000000 is only 1000
megabits or
depending on how your conversion (kibi vs kilo) 953
megabits.
________________________________
Luggage? GPS? Comic books?
Check out fitting gifts for grads
<http://us.rd.yahoo.com/evt=48249/*http:/search.yahoo.com/search?fr=oni_
on_mail&p=graduation+gifts&cs=bz> at Yahoo! Search.
________________________________
Get the Yahoo! toolbar and be alerted to new email
<http://us.rd.yahoo.com/evt=48225/*http://new.toolbar.yahoo.com/toolbar/
features/mail/index.php> wherever you're surfing.
The information contained in this e-mail and any accompanying documents is
intended for the sole use of the recipient to whom it is addressed, and may
contain information that is privileged, confidential, and prohibited from
disclosure under applicable law. If you are not the intended recipient, or
authorized to receive this on behalf of the recipient, you are hereby notified
that any review, use, disclosure, copying, or distribution is prohibited. If
you are not the intended recipient(s), please contact the sender by e-mail and
destroy all copies of the original message. Thank you.
_______________________________________________
mrtg mailing list
[email protected]
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
