> I am running MRTG 2.15.1 on an OpenSuse 10.2 platform. I am using > cfgmaker to create individual config files for all my monitored > servers. Recently I noticed that on several boxes that should be > reporting Bandwidth of One-gig, MRTG is only reporting 100Mb. I have > confirmed using ethtool that the interface is configured for gig speeds, > and this is corroborated by the Ethernet switch auto-negotiating at 1000Mb.
>Sounds like you're not polling the 64 bit counters, add the SNMPv2 >version statement to the end of the host with :::::2 >See: http://oss.oetiker.ch/mrtg/doc/cfgmaker.en.html#IDESCRIPTION Hi Dan, Thanks for the reply. I did try that and it didn't change anything, MRTG still thinks it is a 100Mb link. >Steve wrote: If all else fails, you can always edit the .cfg files and set the MaxBytes[] value to the appropriate amount. This is annoying though, particularly if the cfgmaker is run automatically. Thanks Steve, I could do that, but my bigger concern is if MRTG is reporting the max bandwidth as 100Mb, is it accurately reporting the in/out speeds? _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
