On Tue, 2007-11-27 at 11:31 -0700, Tim Donnelly wrote: > On Tue, 2007-11-27 at 10:48 -0700, Tim Donnelly wrote: > > On Tue, 2007-11-27 at 09:11 -0700, Tim Donnelly wrote: > > >> > > > >> >More to the point, cfgmaker blithely reports whatever the host claims
> > IF-MIB::ifName.1 = STRING: lo > IF-MIB::ifName.2 = STRING: eth0 > IF-MIB::ifName.3 = STRING: eth1 > IF-MIB::ifName.4 = STRING: sit0 > > The ifSpeed for that server give me: > > IF-MIB::ifSpeed.1 = Gauge32: 10000000 > IF-MIB::ifSpeed.2 = Gauge32: 100000000 > IF-MIB::ifSpeed.3 = Gauge32: 0 > IF-MIB::ifSpeed.4 = Gauge32: 0 > > Running the ethtool command on grdb produces the following: > > Settings for eth0: > Speed: 1000Mb/s > So snmp is reporting the eth0 is only 100Mb/s and ethtool says it is > 1000Mb/s. I'm inclined to believe ethtool because the switch the this > server is connected to shows that it is operating at 1000Mb/s. But I am > still confused as to where the inconsistencies lie. in the snmp daemon (likely net-snmp) > That and not getting > any response back from janus when I run the ifName walk. You might have restricted that particular mib tree (it's in ifXTable, not ifTable. But this is not an mrtg issue, it is a net-snmp issue, so you will need to take it up with them. There was a note in the net-snmp release notes about problems detecting ifSpeed prior to 5.1, but that's pretty ancient at this point. > > Thanks for your help. > > _______________________________________________ > mrtg mailing list > [email protected] > https://lists.oetiker.ch/cgi-bin/listinfo/mrtg -- Daniel J McDonald, CCIE #2495, CISSP #78281, CNX Austin Energy http://www.austinenergy.com
signature.asc
Description: This is a digitally signed message part
_______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
