Why in the config are you using 1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.3 and when using snmpget using 1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.3.1 ? Wouldn't it make more sense to use the full OID that you know returns the correct value?>
________________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mills, Charles Sent: Tuesday, April 08, 2008 9:41 AM To: [email protected] Subject: [mrtg] Help reading the OIDs for a Emerson/Libert unit Hi all Im kind of at my wits end with this problem and not sure what Im doing wrong in the MRTG side of things. I dont do a lot of custom cfg files relying mainly on the cfgmaker. I have a Liebert 22 Ton CRAC unit in my data center and Id like to use it as a temp sensor for that part of the computer room. I believe I have the correct OID but MRTG doesnt seem to evaluate/expand it right or I have something else wrong in the config file: Running the MRTG program yields: env LANG=C /usr/local/mrtg-2/bin/mrtg /etc/mrtg/Liebert-AC-4-temp.cfg 2008-04-08 10:31:28: ERROR: Target[liebert-ac-4][_IN_] '.1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.3. $target->[0]{$mode} ' evaluated to 'Ç*19773129' instead of a number 2008-04-08 10:31:28: ERROR: Target[liebert-ac-4][_OUT_] '.1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.3. $target->[0]{$mode} ' evaluated to 'Ç*38089656' instead of a number ./snmpget.pl -c 'RO-snmp-string <ip of liebert webcard> .1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.3.1 Returns: .1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.3.1 = INTEGER: 73 Persuing the docs didnt yield too much that would point me in the right direction if anyone has ever tackled something like this Id appreciate the help. Chuck Charles L. Mills Senior Network Engineer Access Data Corporation / Pittsburgh, PA 15238 (412) 968-4024 FAX: (412) 967-9504 [EMAIL PROTECTED] / http://www.accessdc.com Hosting, Colocation, D-R and Managed Services _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
