Steve Shipway wrote: >> 1st, i want to run mrtg over the cron. >> well. >> i cant seem to manage that. > > Why not? What seems to go wrong? It should work easily, just put it > into your crontabs. > My stupid mistake. i forgot to add the path to mrtg :( ,that works now.
>> WorkDir: /var/www/htdocs/mrtg >> Target[192.168.0.240]: 2:[EMAIL PROTECTED] >> MaxBytes[192.168.0.240]: 102400 >> Title[192.168.0.240]: Traffic Analysis openBSD NAT box >> PageTop[192.168.0.240]: <H1>Stats for openBSD NAT box</H1> >> >> ok, this was very basic. >> i firstly want to mesuare that IP, its the box IP on the LAN site. >> but, what do i wrong. > > What do you want to measure? Your target says to monitor the traffic > throughput on interface #2, is this not what you want? If you want to > specify the interface to monitor by IP address rather than by interface > number, just use the appropriate Target[] syntax. > > Steve > > i think that is wat i do wrong, becuase i do not understand the sytax. i got a lot of error messages back. 2008-05-11 16:43:59 -- Started mrtg with config '/etc/mrtg-cfg' 2008-05-11 16:43:59 -- ERROR: unable to open config file: /etc/mrtg-cfg 2008-05-11 16:44:36 -- Started mrtg with config '/etc/mrtg.cfg' 2008-05-11 16:44:36 -- Can't locate Socket6.pm in @INC (@INC contains: /usr/local/bin/../lib/mrtg2 /usr/local/bin /usr/libdata/perl5/i386-openbsd/5.8.8 /usr/ as i sayd, this mrtg is compleet new to me. in yerly years i runned freesco, mrtg on that was running fun.. _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
