If tie ifAlias has what you're looking for, try using '--ifdesc alias'. Thanks, Garry
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Patrick Topping Sent: Friday, October 10, 2008 7:44 AM I have several pieces of Foundry equipment and I have not been able to get cfgmaker to pick up the ifAlias ( interface descriptions ). I have tried using both --ifref=descr --ifdesc=descr but no luck. I checked the ifAlias to make sure that it was there and contained the proper port names / descriptions and there isn't any problems there. Below is my cfgmaker command: NOTICE: This e-mail and any files transmitted with it are the property of ARCADIS U.S., Inc. and its affiliates. All rights, including without limitation copyright, are reserved. The proprietary information contained in this e-mail message, and any files transmitted with it, is intended for the use of the recipient(s) named above. If the reader of this e-mail is not the intended recipient, you are hereby notified that you have received this e-mail in error and that any review, distribution or copying of this e-mail or any files transmitted with it is strictly prohibited. If you have received this e-mail in error, please notify the sender immediately and delete the original message and any files transmitted. The unauthorized use of this e-mail or any files transmitted with it is prohibited and disclaimed by ARCADIS U.S., Inc. and its affiliates. _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
