The returned value is an integer. Also when i do snmpget operation via MIB
browser the value is returned as gauge, not as counter.
I think question i should be asking how does MRTG plot a 'gauge' returned
value? i have also noticed the "current" value on the MRTG never matches the
CLI or MIB browser output, Its always little bit off.
Thanks
--- On Thu, 18/12/08, Sean Cheesman <[email protected]> wrote:
From: Sean Cheesman <[email protected]>
Subject: Re: [mrtg] Incorrect MRTG plots for Cisco-RTTMON-MIB
To: "[email protected]" <[email protected]>
Received: Thursday, 18 December, 2008, 1:27 PM
#yiv1996123219 P {
MARGIN-TOP:0px;MARGIN-BOTTOM:0px;}
What sort of data is returned? It could be that MRTG is handling the data
differently due to the format (decimals vs. whole numbers, etc.)
From: [email protected] [[email protected]] On Behalf
Of Raman Dhanoa [[email protected]]
Sent: Wednesday, December 17, 2008 9:22 PM
To: [email protected]
Subject: [mrtg] Incorrect MRTG plots for Cisco-RTTMON-MIB
Hi
I have just started using MRTG. My primary requirement is to plot Cisco IP SLA
operation results using Cisco-RTTmon-MIB.
I have been trying to plot Packet Loss value between SD. I have tried different
config options. I have compared MRTG results by polling the OID using a MIB
browser.
The CLI output matches the MIB browser (i am using correct OID) but I get
different results on the MRTG. Is it due to the way MRTG works or normalises
data for plotting. I was under the impression that if a 'gauge' value is polled
using MRTG it will simply plot that.
I have also noticed the current value is always bit off to the actual CLI value
Following is the config for SD packet loss.
Target[100.100.100.1-PktLossSD]:
.1.3.6.1.4.1.9.9.42.1.5.2.1.26.101&.1.3.6.1.4.1.9.9.42.1.5.2.1.26.101:[email protected]
Maxbytes[100.100.100.1-PktLossSD]: 500
XSize[100.100.100.1-PktLossSD]:500
YSize[100.100.100.1-PktLossSD]:250
Title[100.100.100.1-PktLossSD]: Packet Loss Source-Destination
PageTop[100.100.100.1-PktLossSD]: Packet Loss SD Test
ShortLegend[100.100.100.1-PktLossSD]: Pkts
YLegend[100.100.100.1-PktLossSD]: Packets
Legend1[100.100.100.1-PktLossSD]: Pkt Loss SD
Legend2[100.100.100.1-PktLossSD]:
LegendI[100.100.100.1-PktLossSD]: SD
LegendO[100.100.100.1-PktLossSD]:
WithPeak[100.100.100.1-PktLossSD]:dwm
Options[100.100.100.1-PktLossSD]: growright, nopercent,integer, gauge
Thanks
Start your day with Yahoo!7 and win a Sony Bravia TV. Enter now.
-----Inline Attachment Follows-----
_______________________________________________
mrtg mailing list
[email protected]
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
Start your day with Yahoo!7 and win a Sony Bravia TV. Enter now
http://au.docs.yahoo.com/homepageset/?p1=other&p2=au&p3=tagline_______________________________________________
mrtg mailing list
[email protected]
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
