I have been trying for a couple of days now to get mrtg to give me graphs of Channel Usage for my PRI's. I have 8 PRI's in a Cisco 2821 Router. I have tried the following oid's to give me the graphs that I want:
1.3.6.1.4.1.9.10.19.1.1.9.1.3 but I am not getting the value that I want. I did do a snmpwalk within mrtg and still no luck. This is what it tells me: E:\Mrtg\bin>snmpwalk -v1 -c xxxxxxxxx X.X.X.X 1.3.6.1.4.1.9.10.19.1.1.9.1.3 SNMPv2-SMI::enterprises.9.10.19.1.1.9.1.3.0.0 = Gauge32: 6 SNMPv2-SMI::enterprises.9.10.19.1.1.9.1.3.0.1 = Gauge32: 23 I have also tried 1.3.6.1.4.1.9.10.19.1.1.9.1 and this is what I get: E:\Mrtg\bin>snmpwalk -v1 -c xxxxxxxxxxx X.X.X.X 1.3.6.1.4.1.9.10.19.1.1.9.1 SNMPv2-SMI::enterprises.9.10.19.1.1.9.1.3.0.0 = Gauge32: 11 SNMPv2-SMI::enterprises.9.10.19.1.1.9.1.3.0.1 = Gauge32: 22 SNMPv2-SMI::enterprises.9.10.19.1.1.9.1.4.0.0 = Counter32: 21 SNMPv2-SMI::enterprises.9.10.19.1.1.9.1.4.0.1 = Counter32: 23 To my understanding is that after the 9.1.3. the next entry is the slot and the last entry is the port. The interfaces in the 2821 are numbered as T0/0/0 etc.....The cards are VWIC2-2MFT-T1/E1. I want to monitor DS0's in each DS1 but I am unable to successfully. If someone can please assist me in letting me know what I am doing wrong I would greatly appreciate it. Cisco 2821 IOS version: c2800nm-spservicesk9-mz.124-15.T3.bin MRTG version: mrtg-2.12.2 -- View this message in context: http://n2.nabble.com/MRTG-Monitoring-PRI-usage-on-Cisco-2821-tp2113926p2113926.html Sent from the MRTG Users Mailinglist mailing list archive at Nabble.com. _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
