Thank you for the quick response. My issue also affects just a few of my daily graphs as well. I created a .cfg with 15 Cisco routers (all of similar model and config). I added the "Unscaled [_]: dwmy" to the global config and ran indexmaker. When I start MRTG, 7 of them don't "unscale" but the rest do -- I'm looking at the index page (the one that shows all graphs) and that's where I see the problem (as well as on the individual device pages once I drill down).
On Thu, 2009-03-26 at 13:30 -0700, DavidH wrote: > I've searched through tons of other posts but haven't found an answer > to this. I'm using MRTG 2.16.2 (Win32) and am getting sporadic > results using the "Unscaled" global config option. I can usually get > consistent results with the day "d" graph but the others never > change. Note that the others are not re-written every 5 minutes. The weekly is redone every half-hour, the monthly every 2 hours, and I forget the interval on the daily. So, make the change and wait overnight to see if it clears up... -- Daniel J McDonald, CCIE #2495, CISSP #78281, CNX Austin Energy http://www.austinenergy.com _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg -- View this message in context: http://n2.nabble.com/Unscaled-Issue-tp2540906p2541054.html Sent from the MRTG Users Mailinglist mailing list archive at Nabble.com. _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
