10min intervals? That will be the reason. The routers2 'intelligent' code adjusts for the standard 5min and less intervals, but can be confused by the 10min interval (though the uselastupdate should have fixed it). It means that routers2 is using a 5min interval data extraction and this is resulting in the last sample being 'unknown'. I'll need to see if I can find some way for it to cope with this sort of case, but Im away on holiday at the moment so unable to access the code.
Steve ________________________________________ From: Forthofer Russ [[email protected]] Sent: Wednesday, 1 April 2009 7:07 a.m. To: Steve Shipway Cc: [email protected] Subject: RE: problem with router2 compact summary I just changed to uselastupdate=yes and it did not seem to affect the problem. Do I need to wait for another polling cycle to know for sure if that corrects the issue? I am running routers2 v2.19. Is the value I used for the polling cycle affecting this? I am using 10 minute intervals. Should I be using 5 minute intervals (or longer intervals)? ________________________________ From: Steve Shipway [mailto:[email protected]] Sent: Tuesday, March 31, 2009 1:55 PM To: Forthofer Russ Cc: [email protected] Subject: RE: problem with router2 compact summary This could be the race condition between updates and viewing that can sometimes leave the last value as unknown. Does this still happen with the 'uselastupdate=yes' option set in the routers2.conf? Which version of routers2 are you using (the later versions should not have this issue)? If your update occurs at 12:04:59 then any views between 12:00:00 and 12:04:59 will have the last data point as 'unknown' due to the normalisation effect. Routers2 attempts to compensate for this but may not always get it correct. The 'uselastupdate=yes' option get around this at the cost of having down devices show the live graphs based on their last 'up' time rather than the current time. Steev ________________________________ From: [email protected] [[email protected]] On Behalf Of Forthofer Russ [[email protected]] Sent: Wednesday, 1 April 2009 3:48 a.m. To: [email protected] Subject: [mrtg] problem with router2 compact summary I am trying to use the compact summary page using routers2. I can see that it is working, because I SOMETIMES have data on the page. And some routers appear to usually have data, while others seldom do. MRTG appears to be collecting data correctly, because if I select the interface, and display the daily graph for that interface, I do have data. But the compact summary shows 0's in Last, Avg, and Max. Any help would be greatly appreciated. ________________________________ The information contained in this e-mail and any accompanying documents is intended for the sole use of the recipient to whom it is addressed, and may contain information that is privileged, confidential, and prohibited from disclosure under applicable law. If you are not the intended recipient, or authorized to receive this on behalf of the recipient, you are hereby notified that any review, use, disclosure, copying, or distribution is prohibited. If you are not the intended recipient(s), please contact the sender by e-mail and destroy all copies of the original message. Thank you. ________________________________ The information contained in this e-mail and any accompanying documents is intended for the sole use of the recipient to whom it is addressed, and may contain information that is privileged, confidential, and prohibited from disclosure under applicable law. If you are not the intended recipient, or authorized to receive this on behalf of the recipient, you are hereby notified that any review, use, disclosure, copying, or distribution is prohibited. If you are not the intended recipient(s), please contact the sender by e-mail and destroy all copies of the original message. Thank you. ________________________________ The information contained in this e-mail and any accompanying documents is intended for the sole use of the recipient to whom it is addressed, and may contain information that is privileged, confidential, and prohibited from disclosure under applicable law. If you are not the intended recipient, or authorized to receive this on behalf of the recipient, you are hereby notified that any review, use, disclosure, copying, or distribution is prohibited. If you are not the intended recipient(s), please contact the sender by e-mail and destroy all copies of the original message. Thank you. ________________________________ The information contained in this e-mail and any accompanying documents is intended for the sole use of the recipient to whom it is addressed, and may contain information that is privileged, confidential, and prohibited from disclosure under applicable law. If you are not the intended recipient, or authorized to receive this on behalf of the recipient, you are hereby notified that any review, use, disclosure, copying, or distribution is prohibited. If you are not the intended recipient(s), please contact the sender by e-mail and destroy all copies of the original message. Thank you. _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
