On 20/05/10 14:21, Niall O'Reilly wrote:
> Now, the web interface shows me the traffic and not the connected clients.
>
> At this moment, one Client is connected to this AP:
>
> k2# ./check_conn_rad0 ap-w106-19.uclv.net 20 35
> Connections Dot11Radio0 OK: 1
>
> Where is the missmatch or is there missing something else?
Association count is a gauge variable, not a counter.
Since you likely don't have an 'Options[_]' rule,
you'll need to add this. My toolchain builds the
configuration in sections (traffic, associations, packets
whatever), each with its own set of default ('[_]') rules.
Options[target-name]: gauge
This over-rides any other rules which you may have,
so you'll need to specify any other options you
need as well. For example:
Options[target-name]: gauge,growright,noo
IHTH
Niall O'Reilly
_______________________________________________
mrtg mailing list
[email protected]
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
