What software are you using -- IE, native MRTG, or MRTG/RRD/Routers2, or MRTG/RRD/14all, etc etc. This will make a differrence. Also, what version of MRTG, Routers2, 14all etc. as you may have an older (buggy) version.
To set the Y-Axis legend you just use YLegend[SNR]: Steve Steve Shipway University of Auckland ITS UNIX Systems Design Lead [email protected]<mailto:[email protected]> Ph: +64 9 373 7599 ext 86487 ________________________________ From: [email protected] [[email protected]] on behalf of Nick Price [[email protected]] Sent: Saturday, 28 August 2010 10:27 a.m. To: [email protected] Subject: [mrtg] FW: FW: Graph values Thanks Steve It worked for the values under the graph. But it hasn’t changed the Y label I have MAXBytes [SNR]: 160 So it shows the label a 0-160 I want the graphing to stay as it is but only the label to be 0 – 16 because its dB’s Cheers Nick From: Steve Shipway [mailto:[email protected]] Sent: Friday, August 27, 2010 22:25 To: Nick Price; [email protected] Subject: RE: [mrtg] FW: Graph values Factor[SNR]: 0.1 Note I think this may only work if you're using RRDTool as the backend as MRTG doesnt like decimals. Factor[] differs from '* 0.1' on the Target line because a '* 0.1' on the Target line divides by tem BEFORE storing the data in the RRD, a Factor[]:0.1 will divide by ten at display time. Thus, you do not need to modify your MaxBytes if you are using Factor[] but you do if you are using '* 0.1' on the Target line. Steve Steve Shipway University of Auckland ITS UNIX Systems Design Lead [email protected]<mailto:[email protected]> Ph: +64 9 373 7599 ext 86487 ________________________________ From: [email protected] [[email protected]] on behalf of Nick Price [[email protected]] Sent: Saturday, 28 August 2010 3:41 a.m. To: [email protected] Subject: [mrtg] FW: Graph values I am graphing SNR values from a Cisco 877 the graphs look ok But I would like to divide the Y legend values by 10 because I am dealing with dB’s I have MAXBytes [SNR]: 160 But I want the legend to show this as 16.0 while keeping the max bytes untouched as this gives a nice graph Also I would like the legend 1 and legend 2 below the graph to have its Max Average and current values divided by 10 Any ideas on how I can achieve this please Many thanks Nick
_______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
