Thanks again Steve. Here is the full cfg file. I think I only cut the commented lines, but just in case:
###################################################################### # Multi Router Traffic Grapher -- Example Configuration File ###################################################################### # This file is for use with mrtg-2.0 # # Note: # # * Keywords must start at the begin of a line. # # * Lines which follow a keyword line which do start # with a blank are appended to the keyword line # # * Empty Lines are ignored # # * Lines starting with a # sign are comments. # Where should the logfiles, and webpages be created? # Minimal mrtg.cfg #-------------------- HtmlDir: /var/www/mrtg ImageDir: /var/www/mrtg LogDir: /var/lib/mrtg ThreshDir: /var/lib/mrtg Target[r1]: [email protected] MaxBytes[r1]: 1250000 Title[r1]: Traffic Analysis PageTop[r1]: <H1>Stats for our Ethernet</H1> Hope this helps. Andrea On Mon, 31 Jan 2011 13:18:25 -0800 (PST), S Shipway [via MRTG Mailinglists] wrote: > Clearly MRTG is running in Native mode, and scheduling correctly > (since else the web pages don’t update) > > The error message: > >> 2011-01-31 11:02:40 -- Monday, 31 January 2011 at 11:02: ERROR: >> Target[r1][_IN_] '[hidden email] [1]' (warn): (Missing operator > before ?) > > shows that there are problems with the polling. Can you post ALL of > the .cfg file (you previously only posted a selection of lines, the > problem may lie elsewhere) > > My guess is that you have an incorrect space or reserved character > somewhere in the Target line definition, if these are the only error > messages you receive. > > Steve > > Steve Shipway > ITS Unix Services Design Lead > University of Auckland, New Zealand -- View this message in context: http://mrtg-mailinglists.795376.n2.nabble.com/No-Data-again-tp5975466p5978853.html Sent from the MRTG Users Mailinglist mailing list archive at Nabble.com. _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
